Ricoh fax4700l Operator's Manual page 747

Ricoh fax4700l:
Hide thumbs Also See for fax4700l:
Table of Contents

Advertisement

INTERNET FAXING
Note 1
• Before performing the follow-
ing procedure, you must first
store the polling ID for your fax
machine and its telephone
number. The same polling ID
must be stored for both the
transfer requester (NIC FAX)
and the transfer station.
• See page 49 of the main Opera-
tor's Manual for details on using
Function 61 to store the polling
ID (ID code).
Note 2
• Sending a transfer request
transmission to a fax that does
not have a transfer function or
to a computer by mail is sent as
a normal transmission to and
received by the transfer station
without being transferred to any
other destination. Note that no
error report is returned to the
transfer requester (the originator
of the transmission). Because of
this you should always confirm
that the transfer station is a fax
that is equipped with a transfer
function.
Contents
GETTING AQUAINTED
IC FAX Com
WITH NIC FAX
Redirector
GETTING READY
TROUBLESHOOTING
INTERNET FAXING
APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
Note 1
Make sure that the
indicator is lit.
If the
Memory
indicator is not lit, press the
turn it on.
Place your document face
down into the feeder, and set
the scanning parameters.
Text is sent as Detail size, even if Fine is selected.
Press
Function
.
If a function screen is already on the display, press
See page 4 of the main Operator's Manual for details on the
sequence that functions are displayed.
1 3
Press
.
Note 2
In Putting a Mail Address Stored in a Quick Dial/Speed Dial.
Use Quick Dial or Speed
Dial to specify the transfer
station.
Quick Dial
Press the Quick Dial to which the desired address is as-
signed.
Speed Dial
Press
Speed Dial/Tel Directory
the applicable Speed Dial.
78
Memory
MEMORY TRANS.
SET DOC. OR ENTER FAX NO.
MEMORY TRANS.
ENTER FAX NUMBER
FUNCTION
10TRANS. MODE
30PROG.CHANGE
TRANSFER
TRANSFER.
TRANSFER PRESS YES OR CLR • NO
TRANSFER.
RECV
use the Ten-Key Pad to input
24.SEP. 15:00
MEMORY100%
Memory
key to
OPTIONS ↓
<G3>
NO.:YES OR NO
20CLEAR CHANGE
40REPORTS
No
.
OPTIONS ↓
1
<G3>
1
57 design
1

Advertisement

Table of Contents
loading

Table of Contents