Ricoh fax4700l Operator's Manual page 48

ROUTINE OPERATION
1. Press , 0 and 3.
m
2. Example: 10 pages.
1 0
3. Yes.
TTI (Transmit Terminal Identification)
Normally, the TTI programmed in your machine is printed at the top of each of the
pages you transmit when they are received at the other end. The top of the image
will be overprinted if there is no margin at the top of the transmitted page.
In some cases, you may wish the other party to receive an unmarked copy of your
original. In this case, you can switch TTI off.
Note: If you switch TTI off, make sure that Label Insertion is also off if you want
the image received at the other end to be unmarked.
Cross-reference
TTI: see page 261.
1. Press , 0 and 6.
m
2. If you wish to change the TTI setting,
press or until the displayed setting is
j k
correct.
3. Yes when you have finished.
Label Insertion: see page 93.
SENDING A FAX MESSAGE
PAGE COUNT SET COUNT
PAGE(S)
_
PAGE COUNT PRESS YES OR NO
10 PAGE(S)
SELECT ← → YES TO END
TTI
ON
SELECT ← → YES TO END
TTI
ON
NO TO END
OFF
OFF
37