Changing The Connection Mode; Changing From The User Mode To The Administrator Mode - Ricoh fax4700l Operator's Manual

IC FAX Monitor
CHANGING THE
CONNECTION
MODE
Contents
GETTING AQUAINTED IC FAX Com
Redirector
WITH NIC FAX
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
Use the following procedure to switch IC FAX Monitor between its
User Mode and Administrator Mode.

Changing from the User Mode to the Administrator Mode

From the initial IC FAX Monitor screen, click the
menu's [Administrator Mode]
Type in the password.
Click [OK] .
The message "<BUSY! PC COMMUNICATING>" is shown on
the display if connected to IC FAX Monitor. Also, IC FAX
functions 20 through 40 and functions normally made avail-
able by input of the password 2222 are all disabled.
Attempting to enter the Administrator Mode while any function
in the range of 20 through 40, or a function made available by
input of the password 2222 causes the message "<Sorry, busy
for doing some other tasks>" to appear in the IC FAX Monitor
screen. IC Fax Monitor will not enter the Administrator Mode
when this message appears.
Failure to perform any input for 10 minutes in the Administra-
tor Mode causes an error. Next, IC FAX Monitor returns auto-
matically to the User Mode.
See page 62 of this Operator's Manual for details about set-
ting the Administrator Mode password.
121
[Connect]
command.
[Password]
[OK]