Printing A Sample Of Data On The Reports - Ricoh fax4700l Operator's Manual

REPORTS

Printing a Sample of Data on the Reports

For reference purposes, the machine prints the first few inches of the fax
message on the following reports.
Communication Result Report
File Reserve Report
File Clear Report (Polling Clear Report)
Communication Failure Report
Transfer Result Report
The procedure to switch this feature on or off is as follows. (See page 11 if you
need more information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
The settings for switch 00 are now
shown on the bottom line of the display.
m
2. Press until the settings for switch 04
are shown.
The setting you need to use is digit 7.
3. If you wish to change the setting, press 7
on the ten key pad.
4. Finish: Yes and Function.
AUTOMATICALLY PRINTED REPORTS
USER PARAMETER
DEFAULT: 01000000
SWITCH00: 01000000
USER PARAMETER
DEFAULT: 01000000
SWITCH04: 01000000
SWITCH04: 0000 0000
Digit 7 (Double underlined)
0: This feature is off
1: This feature is on
PRINT LIST →
↑
YES TO END ↓
PRINT LIST →
↑
YES TO END ↓
175