Ricoh fax4700l Operator's Manual page 144

ADVANCED FEATURES
Two in One
Received Message
Page 1
This feature helps you conserve paper. If the size of the incoming page is half the
size of the paper in the cassette, the machine will print out two pages on one
sheet of paper.
In the example shown above, somebody is sending your machine two sheets of
half-letter sized paper and your machine is printing them out on one letter sized
sheet.
Note: The effectiveness of this feature depends on the sizes of paper
stocked in your machine's cassettes.
If you have legal size paper installed, the machine will print the two
pages on one piece of legal size paper.
If Two in One is switched on, you will not be able to print out more
than one copy of an incoming fax message using Multi-sort Docu-
ment Reception.
To switch this feature on, do the following. (See page 7 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3
2. The settings for switch 00 are now shown
on the bottom line of the display.
m
3. Press until the settings for switch 10 are
shown.
The setting that you need to change is
digit 1.
4. If you wish to change the setting, press 1.
5. Finish: Yes Function
Page 2
Half-letter size
Printout
Page 1
Letter Size
PRINT LIST →
USER PARAMETER
DEFAULT: 01000000
YES TO END ↓
SWITCH00: 01000000
SWITCH00:
00000000
SWITCH10:
00000000
Digit 1
0: Two in One is disabled.
1: Two in One in enabled.
RECEPTION
Page 2
↑
133