Ricoh fax4700l Operator's Manual page 42

ROUTINE OPERATION
Selecting the Halftone Type
This model has two types of Halftone: the Dither Process and the higher quality
Error Diffusion Process. To change the currently used Halftone type, perform the
following procedure.
1. Function 6 0 2 2 2 2 6 and 3.
The settings for switch 00 are now
shown on the bottom line of the display.
2. Press or until the settings for switch
i m
10 are shown. You need to change digit
7.
If you wish change the setting press 7
on the ten key pad.
Digit 7
1: Speed mode
0: Standard mode
Speed mode: The machine will use the Basic Halftone Process.
Standard mode: The machine will use the higher quality Error Diffusion Process.
3. Finish: Yes and Function
Halftone Mode slows down the transmission speed, and may increase your
communication costs, especially if you use the Error Diffusion process. Higher
resolutions also do this. This is because these settings create larger amounts
of data to be sent.
Messages are transmitted the fastest if you use the standard resolution
setting, and keep Halftone off.
SENDING A FAX MESSAGE
PRINT LIST →
USER PARAMETER
DEFAULT: 01000000
YES TO END ↓
SWITCH00: 01000000
PRINT LIST →
USER PARAMETER
DEFAULT: 01000000
YES TO END ↓
SWITCH00: 11000000
↑
↑
31