ADVANCED FEATURES
Operating the Tone Key
1. Make sure that the machine is in standby mode, and that there is no document
in the feeder.
2. Pick up the telephone handset, or press On Hook Dial.
3. Dial the remote facility. Do not press Start
4. After your line is connected to the remote facility, do the following:
If your telephone line type is DTMF (Tone Dial): Go to step 5.
If your telephone line type is Pulse Dial: Press the User Function key where
the Tone key is programmed. (Example: F1) A dot appears on the display.
5. Input the digits that you need to use the remote facility. These digits will depend
on the remote facility.
Note: Do not press Start.
6. After you have finished your business with the remote facility, hang up.
Cross-reference
Tone Dial (Telephone Line Type): see page 284.
TRANSMISSION
89