Ricoh fax4700l Operator's Manual page 726

GETTING READY
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
Make the [Mail] settings described below (1 through 8), and
then click [OK] .
1 [SMTP Server]
Type in the IP address of the SMTP server to be connected to
for sending Internet mail.
2 [POP Server]
Type in the IP address of the POP server to be connected to
for receiving Internet mail.
3 [Host Name]
Type in the NIC FAX host name. This input can be skipped.
4 [Mail Address]
Type in the NIC FAX mail address. The address you type here
is automatically added to the "From" field of outgoing mail.
5
[Domain Name]
Type in the domain name of the network where NIC FAX is
located. This input can be skipped.
6 [Login Name]
Type in the name for logging into the POP server.
7
[Login Password]
Type in the password for logging into the POP server.
8 Mail RX Interval
Specify the minimum interval for logging into the POP server
to pick up any mail that is waiting. An interval in the range of 1
to 60 minutes can be specified, in one-minute units. The
factory default setting for the interval is 3 (minutes).
57