1. Manuals
  2. Brands
  3. ABB Manuals
  4. Protection Device
  5. Relion 670 series
  6. Manual

ABB Relion Series 670 Manual

Hide thumbs Also See for Relion Series 670:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operator's Manual, Commissioning Manual
®
Relion
Protection and Control
670 series 2.1 IEC
IEC 61850 Edition 1 Communication protocol
manual

Advertisement

Table of Contents
loading

Related Manuals for ABB Relion Series 670

Summary of Contents for ABB Relion Series 670

  • Page 1 ® Relion Protection and Control 670 series 2.1 IEC IEC 61850 Edition 1 Communication protocol manual...
  • Page 3 Document ID: 1MRK 511 349-UEN Issued: December 2015 Revision: - Product version: 2.1 © Copyright 2015 ABB. All rights reserved...
  • Page 4 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software and hardware described in this document is furnished under a license and may be used or disclosed only in accordance with the terms of such license.
  • Page 5 In case any errors are detected, the reader is kindly requested to notify the manufacturer. Other than under explicit contractual commitments, in no event shall ABB be responsible or liable for any loss or damage resulting from the use of this manual or the application of the equipment.
  • Page 6 (EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standard EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.

  • Page 7: Table Of Contents

    Table of contents Table of contents Section 1 Introduction...............9 This manual..................9 Intended audience................9 Product documentation..............10 Product documentation set............10 Document revision history............11 Related documents..............11 Document symbols and conventions..........13 Symbols..................13 Document conventions..............14 IEC61850 edition 1 / edition 2 mapping..........15 Section 2 Introduction to IEC 61850..........23 Related documentation to IEC 61850..........24 Section 3 Substation Configuration description Language (SCL)..
  • Page 8 Table of contents Bay control QCBAY..............76 Logical node for interlocking SCILO ........... 78 Switch controller CSWI..............79 Switch controller SCSWI............79 Bay reserve function QCRSV............82 Logical nodes for conversion functions..........84 Integer to Boolean converter FCVB..........84 Integer to Boolean 16 conversion with logic node representation ITBGAPC............84 Boolean to integer converter FCVI..........
  • Page 9 Table of contents Distance measuring zone, quadrilateral characteristic for series compensated lines ZMCPDIS........122 Distance measuring zone, quadrilateral characteristic for series compensated lines ZMCAPDIS......... 123 Full-scheme distance protection, mho characteristic ZMHPDIS................125 Fullscheme distance protection, quadrilateral for earth faults ZMMPDIS..............126 Fullscheme distance protection, quadrilateral for earth faults ZMMAPDIS..............127 Distance protection zone, quadrilateral characteristic,...
  • Page 10 Table of contents Phase segregated Scheme communication logic for distance protection ZC1PPSCH........... 165 Current reversal and weak-end infeed logic for phase segregated communication ZC1WPSCH......167 Sensitive directional earth fault PSDE........168 Sensitive directional residual overcurrent and power protection SDEPSDE ............168 Switch onto fault logic PSOF.............
  • Page 11 Table of contents Three phase undercurrent PTUC..........225 Three phase undercurrent LCP3PTUC........ 225 Undervoltage PTUV..............226 Two step undervoltage protection UV2PTUV ......226 Loss of voltage check LOVPTUV ........229 Underfrequency PTUF...............229 Underfrequency protection SAPTUF ........229 Volts per Hz PVPH..............231 Overexcitation protection OEXPVPH ........231 Multipurpose analog protection GAPC........
  • Page 12 Table of contents Fault locator RFLO..............274 Fault locator LMBRFLO............274 Secondary system supervision SPVC........275 Fuse failure supervision SDDRFUF........275 Fuse failure supervision based on voltage difference VDSPVC................276 Pole discordance protection RPLD ...........277 Pole discordance protection CCPDSC.........277 Power swing detection RPSB............278 Power swing detection ZMRPSB ........
  • Page 13 Table of contents Current sequence component measurement CMSQI..318 Voltage sequence measurement VMSQI......320 Logical nodes for sensors and monitoring........322 Circuit breaker monitoring SCBR..........322 Breaker monitoring SSCBR..........322 Insulation medium supervision (gas) SIMG.......326 Gas medium supervision SSIMG......... 326 Insulation medium supervision (liquid) SIML......328 Liquid medium supervision SSIML........
  • Page 14 Table of contents Section 10 Glossary............... 351 Glossary..................351 670 series 2.1 IEC Communication protocol manual...

  • Page 15: Section 1 Introduction

    Section 1 1MRK 511 349-UEN - Introduction Section 1 Introduction This manual The communication protocol manual describes the communication protocols supported by the IED. The manual concentrates on the vendor-specific implementations. Intended audience This manual addresses the communication system engineer or system integrator responsible for pre-engineering and engineering for communication setup in a substation from an IED perspective.

  • Page 16: Product Documentation

    Section 1 1MRK 511 349-UEN - Introduction Product documentation 1.3.1 Product documentation set Engineering manual Installation manual Commissioning manual Operation manual Application manual Technical manual Communication protocol manual Cyber security deployment guideline IEC07000220-4-en.vsd IEC07000220 V4 EN Figure 1: The intended use of manuals throughout the product lifecycle The engineering manual contains instructions on how to engineer the IEDs using the various tools available within the PCM600 software.

  • Page 17: Document Revision History

    Section 1 1MRK 511 349-UEN - Introduction well as verifying settings by secondary injection. The manual describes the process of testing an IED in a substation which is not in service. The chapters are organized in the chronological order in which the IED should be commissioned. The relevant procedures may be followed also during the service and maintenance activities.
  • Page 18 Section 1 1MRK 511 349-UEN - Introduction Documents related to REC670 Document numbers Application manual 1MRK 511 358-UEN Commissioning manual 1MRK 511 360-UEN Product guide 1MRK 511 361-BEN Technical manual 1MRK 511 359-UEN Type test certificate 1MRK 511 361-TEN Documents related to RED670 Document numbers Application manual 1MRK 505 343-UEN...

  • Page 19: Document Symbols And Conventions

    Section 1 1MRK 511 349-UEN - Introduction Documents related to RES670 Document numbers Application manual 1MRK 511 364-UEN Commissioning manual 1MRK 511 366-UEN Product guide 1MRK 511 367-BEN Technical manual 1MRK 511 365-UEN Type test certificate 1MRK 511 367-TEN 670 series manuals Document numbers Operation manual 1MRK 500 123-UEN...

  • Page 20: Document Conventions

    Section 1 1MRK 511 349-UEN - Introduction The caution icon indicates important information or warning related to the concept discussed in the text. It might indicate the presence of a hazard which could result in corruption of software or damage to equipment or property.

  • Page 21: Iec61850 Edition 1 / Edition 2 Mapping

    Section 1 1MRK 511 349-UEN - Introduction • Signals in frames with a shaded area on their right hand side represent setting parameter signals that are only settable via the PST or LHMI. • If an internal signal path cannot be drawn with a continuous line, the suffix -int is added to the signal name to indicate where the signal starts and continues.
  • Page 22 Section 1 1MRK 511 349-UEN - Introduction Function block name Edition 1 logical nodes Edition 2 logical nodes BUSPTRC_B15 BUSPTRC BUSPTRC BUSPTRC_B16 BUSPTRC BUSPTRC BUSPTRC_B17 BUSPTRC BUSPTRC BUSPTRC_B18 BUSPTRC BUSPTRC BUSPTRC_B19 BUSPTRC BUSPTRC BUSPTRC_B20 BUSPTRC BUSPTRC BUSPTRC_B21 BUSPTRC BUSPTRC BUSPTRC_B22 BUSPTRC BUSPTRC BUSPTRC_B23...
  • Page 23 Section 1 1MRK 511 349-UEN - Introduction Function block name Edition 1 logical nodes Edition 2 logical nodes CCRWRBRF CCRWRBRF CCRWRBRF CCSRBRF CCSRBRF CCSRBRF CCSSPVC CCSRDIF CCSSPVC CMMXU CMMXU CMMXU CMSQI CMSQI CMSQI COUVGAPC COUVLLN0 COUVPTOV COUVPTOV COUVPTUV COUVPTUV CVGAPC GF2LLN0 GF2MMXN GF2MMXN...
  • Page 24 Section 1 1MRK 511 349-UEN - Introduction Function block name Edition 1 logical nodes Edition 2 logical nodes GOOSEDPRCV DPGREC GOOSEINTLKRCV INTGREC GOOSEINTRCV INTSGREC GOOSEMVRCV MVGREC GOOSESPRCV BINSGREC GOOSEVCTRRCV VCTRGREC GOPPDOP GOPPDOP GOPPDOP PH1PTRC GRPTTR GRPTTR GRPTTR GSPTTR GSPTTR GSPTTR GUPPDUP GUPPDUP GUPPDUP...
  • Page 25 Section 1 1MRK 511 349-UEN - Introduction Function block name Edition 1 logical nodes Edition 2 logical nodes LPTTR LPTTR LPTTR LT3CPDIF LT3CPDIF LT3CGAPC LT3CPDIF LT3CPHAR LT3CPTRC LT6CPDIF LT6CPDIF LT6CGAPC LT6CPDIF LT6CPHAR LT6CPTRC MVGAPC MVGGIO MVGAPC NS2PTOC NS2LLN0 NS2PTOC NS2PTOC NS2PTRC NS2PTRC NS4PTOC...
  • Page 26 Section 1 1MRK 511 349-UEN - Introduction Function block name Edition 1 logical nodes Edition 2 logical nodes ROV2PTOV GEN2LLN0 PH1PTRC PH1PTRC ROV2PTOV ROV2PTOV SAPFRC SAPFRC SAPFRC SAPTOF SAPTOF SAPTOF SAPTUF SAPTUF SAPTUF SCCVPTOC SCCVPTOC SCCVPTOC SCILO SCILO SCILO SCSWI SCSWI SCSWI SDEPSDE...
  • Page 27 Section 1 1MRK 511 349-UEN - Introduction Function block name Edition 1 logical nodes Edition 2 logical nodes TEILGAPC TEILGGIO TEILGAPC TMAGAPC TMAGGIO TMAGAPC TPPIOC TPPIOC TPPIOC TR1ATCC TR1ATCC TR1ATCC TR8ATCC TR8ATCC TR8ATCC TRPTTR TRPTTR TRPTTR U2RWPTUV GEN2LLN0 PH1PTRC PH1PTRC U2RWPTUV U2RWPTUV UV2PTUV...
  • Page 28 Section 1 1MRK 511 349-UEN - Introduction Function block name Edition 1 logical nodes Edition 2 logical nodes ZMMAPDIS ZMMAPDIS ZMMAPDIS ZMMPDIS ZMMPDIS ZMMPDIS ZMQAPDIS ZMQAPDIS ZMQAPDIS ZMQPDIS ZMQPDIS ZMQPDIS ZMRAPDIS ZMRAPDIS ZMRAPDIS ZMRPDIS ZMRPDIS ZMRPDIS ZMRPSB ZMRPSB ZMRPSB ZSMGAPC ZSMGAPC ZSMGAPC 670 series 2.1 IEC...

  • Page 29: Section 2 Introduction To Iec 61850

    Section 2 1MRK 511 349-UEN - Introduction to IEC 61850 Section 2 Introduction to IEC 61850 The general scope of the IEC 61850 protocol standard is designed to support the communication of all functions being performed in the substation. Its’ main goal is interoperability;...

  • Page 30: Related Documentation To Iec 61850

    Section 2 1MRK 511 349-UEN - Introduction to IEC 61850 • MICS, Modeling Information Conformance Statement, contains the declaration of the used logical node types. • PICS, Protocol Information Conformance Statement, contains the details and what is supported regarding protocol facilities. •...
  • Page 31 Section 2 1MRK 511 349-UEN - Introduction to IEC 61850 Document ID Title IEC 61850-5 Communication networks and systems in First edition 2003-07 substations - Ref. number: IEC 61850-5:2003(E) Part 5: Communication requirements for functions and devices models IEC 61850-6 Communication networks and systems in First edition 2004-03 substations -...

  • Page 33: Section 3 Substation Configuration Description Language (Scl)

    Section 3 1MRK 511 349-UEN - Substation Configuration description Language (SCL) Section 3 Substation Configuration description Language (SCL) Four different types of SCL files - SCD, CID, IID, and ICD, can be exported from PCM 600. The SCL language is based on XML. However, detailed knowledge of the XML contents is not needed.

  • Page 34: The Substation Section

    Section 3 1MRK 511 349-UEN - Substation Configuration description Language (SCL) Substation VoltageLevel LNode Communucation Subnetwork Connected AP IED Name AccessPoint Address IED Name AccessPoint Address Services AccessPoint Server Authentication LDevice DataSet Report Control GOOSE Control Inputs SettingControl DataTypeTemplates LNodeType DOType DOType DAType...

  • Page 35: The Ied Section

    Section 3 1MRK 511 349-UEN - Substation Configuration description Language (SCL) network with no relation to an existing media or protocol. The mapping to an existing media and protocol is specified in IEC 61850–8–1. The IEC 61850 standard describes in part 7–2 the ACSI in a media and protocol independent form.
  • Page 36 Section 3 1MRK 511 349-UEN - Substation Configuration description Language (SCL) supported services. The structure of the IED section follows the definitions made in the IEC 61850 standard. Two basic IED types are used in system configuration. • Station level IEDs are located on the station level and are identified as client IEDs when they read or write information from or to the bay IEDs.
  • Page 37 Section 3 1MRK 511 349-UEN - Substation Configuration description Language (SCL) Subnetwork Server SB1.LD0 Logical Node LLN0 Data LPHD SXCBR1 SCSWI1 SXSWI1 Health Data SCSWI2 NamePlt Attribute SXSWI2 ctlVal SCSWI3 stVal SXSWI3 OpCnt SCSWI4 BlkOpn SXSWI4 BlkCls Origin CBOpCap ctlModel SCSWI5 Control CVMMXU1...

  • Page 38: Tool Concept

    Section 3 1MRK 511 349-UEN - Substation Configuration description Language (SCL) The number of data objects and data attributes per DO is defined by the used LN type in the IED. The content of logical node types and DO types are defined in the DTT. This also means that the definitions in the DTT section have to be unique within an SCD file.

  • Page 39: Engineering Concept In Iec 61850-6

    Section 3 1MRK 511 349-UEN - Substation Configuration description Language (SCL) IET600: • Open a SCD file or import/merge a SCD, ICD or CID file for the particular IED(s). • For each IED, the user defines the datasets, the control blocks for reporting (this means unbufffered/buffered reporting and GOOSE) and the properties for each report control block.
  • Page 40 Section 3 1MRK 511 349-UEN - Substation Configuration description Language (SCL) Client B Client A System tool IED Z IED A IED B …. tool IEC09000151-1-en.vsd IEC09000151 V1 EN Figure 5: Relation between system and IED tools Regardless of the engineering approach, the idea is that the IED tool provides the CID or ICD file for each IED.

  • Page 41: Section 4 Communication Profile

    Section 4 1MRK 511 349-UEN - Communication profile Section 4 Communication profile The IEC 61850 standard is conceptually written to be independent of an existing communication media and message transmission concept. Out of this, a specific communication profile is decided and has been commonly used. The profile contains: •...
  • Page 42 Section 4 1MRK 511 349-UEN - Communication profile Generic Generic Object Core Substation Sampled Oriented Time ACSI Values Status Substation Services Sync (Multicast) Event Event TimeSync GOOSE GSSE MMS Protocol Suite (SNTP) TCP/IP ISO CO GSSE UDP/IP T-Profile T-Profile T-Profile ISO/IEC 8802-2 LLC ISO/IEC 8802-3 Ethertype ISO/IEC 8802-3...

  • Page 43: Section 5 Supported Services

    Section 5 1MRK 511 349-UEN - Supported services Section 5 Supported services IEC 61850-7-2 describes the services in the standard. IEC 61850-8-1 describes how the services are applied in the communication. The conformance documents contain the description of the supported services in the IED. Services that are not mentioned in this chapter or in the conformance document are not supported by the IED.
  • Page 44 Section 5 1MRK 511 349-UEN - Supported services Setting parameter values via IEC 61850 Edition 2 Some parameters values can be set over IEC 61850 Edition 2 communication, provided that the parameter Enable61850Setting has been set to Enabled in Main menu/Configuration/Communication/Station communication/IEC61850–8–1/ IEC61850–8–1:1/Enable61850Setting by PCM600 or in the LHMI.
  • Page 45 Section 5 1MRK 511 349-UEN - Supported services • Issue: write to SelectEditSG(n). (n) is the setting group • Issue: write to one or several parameters • Issue: write to ConfirmEditSG (CnfEdit=TRUE) If a second SelectEditSG(n) is issued where n differs from the actual, any setting changes are discarded and a new edit session is started.
  • Page 46 Section 5 1MRK 511 349-UEN - Supported services When publishing a measured value, the user must take care of which measured value data attributes are added to a data set. If the measured value is event-handled (like in the case of MMXU functions), then one can add that value directly to the data set. If the value is not event-handled, (like in the case of Synchrocheck function), it is recommended to connect the value desired to be published to a MVGAPC function block (in ACT) and then use the measured value given by the MVGAPC.

  • Page 47: Section 6 Data Sets And Control Blocks

    Section 6 1MRK 511 349-UEN - Data sets and control blocks Section 6 Data sets and control blocks Data sets IEC 61850 has defined data sets and report control blocks to transmit signals for monitoring purposes. Data sets are also used for GOOSE messages in horizontal communication among IEDs.

  • Page 48: Report Control Block (Urcb/Brcb)

    Section 6 1MRK 511 349-UEN - Data sets and control blocks • All data objects or their data attributes can be selected for a data set. • Only those data attributes of a data object can/will be selected which have the same function constraint (FC).
  • Page 49 Section 6 1MRK 511 349-UEN - Data sets and control blocks used as a background cycle to ensure that the process image in all partners is the same. • General interrogation • A general interrogation is only done on request from a client. Not all Data- sets may contain information which is needed for a general update of the client.
  • Page 50 Section 6 1MRK 511 349-UEN - Data sets and control blocks Note that the possible trigger options for each attribute are included and defined in the datatype template section in SCL. Link BRCB to a client LN The BRCB has to know to whom the events shall be transmitted. This is the signal routing engineering step.

  • Page 51: Goose Control Blocks (Gocb)

    Section 6 1MRK 511 349-UEN - Data sets and control blocks GOOSE Control Blocks (GoCB) Data-set Data-set Data-set Subnetwork Comm. Comm. Server Server GoCB GoCB Input Input GoCB GoCB Input Input GoCB GoCB Input Input DataSet DataSet DataSet DataSet DataSet DataSet en06000109.vsd IEC06000109 V2 EN...
  • Page 52 Section 6 1MRK 511 349-UEN - Data sets and control blocks multicast association. The event that causes the server to invoke a SendGOOSE service is a local application issue as defined in IEC 61850-7-2. Each update may generate a message in order to minimize throughput time. Additional reliability is achieved by re-transmitting the same data (with gradually increasing SqNum and retransmission time).
  • Page 53 Section 6 1MRK 511 349-UEN - Data sets and control blocks A GOOSE message is forced to be transmitted when a trigger change is detected for a data attribute. All members of the data set are copied in the send buffer with their actual value and the message is sent.

  • Page 55: Section 7 Logical Node Data Model

    The IEC 61850 standard does not describe the functionality and way of operation. Each supplier has to describe this separately. ABB has described their function blocks that represent a logical node and all other function blocks in the technical manuals.

  • Page 56: Logical Nodes For Automatic Control

    Section 7 1MRK 511 349-UEN - Logical node data model The mandatory data objects as defined in IEC 61850-7-4 as part of the Common Logical Node are Mode, Behavior, Health and NamePlate. Mode The operation modes ON (enabled) and BLOCKED are supported remotely by a command or locally from the LHMI of the IED.
  • Page 57 Section 7 1MRK 511 349-UEN - Logical node data model Table 2: TR1ATCC Logical node data DO name DO type DA name Signal Mon/C Description TapChg a_dBSC Oper.ctlVal Command parameter for IEC61850 Oper.origin.orCat Command parameter for IEC61850 valWTr.posVal Tap position Oper.origin.orIdent Command parameter for IEC61850...
  • Page 58 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LTCBlk a_dSPC Oper.T Command parameter for IEC61850 Oper.Test Command parameter for IEC61850 Oper.Check Command parameter for IEC61850 stVal Voltage control blocked while in automatic control mode Quality: Voltage control blocked while in automatic control mode...
  • Page 59 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description TotW c_dMV mag.f Calculated active power (service value) Quality: Calculated active power (service value) Timestamp: Calculated active power (service value) TotVAr c_dMV mag.f Calculated reactive power (service...
  • Page 60 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LVA1On v1_dSPC Oper.Test Command parameter for IEC61850 Oper.Check Command parameter for IEC61850 stVal The setting LVAConst1 is used (service value) Quality: The setting LVAConst1 is used (service value) Timestamp: The setting LVAConst1 is used (service value)
  • Page 61 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LVA3On v1_dSPC Timestamp: The setting LVAConst3 is used (service value) LVA4On v1_dSPC Oper.ctlVal Command parameter for IEC61850 Oper.origin.orCat Command parameter for IEC61850 Oper.origin.orIdent Command parameter for...
  • Page 62 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description HiWFwd v1_dSPS stVal PGTFWD Active power above the settable limit powerActiveForw PGTFWD Quality: Active power above the settable limit powerActiveForw PGTFWD Timestamp: Active power above the settable limit powerActiveForw HiWRv...
  • Page 63 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description DayHuntAlm v1_dSPS stVal DAYHUNT Alarm for too many tap changer operations during the last 24 hours DAYHUNT Quality: Alarm for too many tap changer operations during the last 24 hours DAYHUNT...
  • Page 64 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LodV v2_dMV ULOAD Timestamp: Calculated compensated voltage (service value) AverA v2_dMV mag.f IPRIM Max of 3 phase currents (service value) IPRIM Quality: Max of 3 phase currents (service value) IPRIM...
  • Page 65 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description BndCtrAct v2_dMV mag.f Actual voltage setpoint Quality: Actual voltage setpoint Timestamp: Actual voltage setpoint LodAIm v3_dMV mag.f ATCCOUT Group connection to horizontal communication and YLTCIN ATCCOUT Quality: Group connection to...

  • Page 66: Automatic Voltage Control For Tapchanger, Parallel Control Tr8Atcc

    Section 7 1MRK 511 349-UEN - Logical node data model 7.2.1.1 Automatic voltage control for tapchanger, parallel control TR8ATCC LN type LN prefix LN class Function block name TR8ATCC (revision 5) TR8 ATCC TR8ATCC Table 3: TR8ATCC Logical node data DO name DO type DA name...
  • Page 67 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LTCBlk a_dSPC Oper.ctlVal Command parameter for IEC61850 Oper.origin.orCat Command parameter for IEC61850 Oper.origin.orIdent Command parameter for IEC61850 Oper.ctlNum Command parameter for IEC61850 Oper.T Command parameter for...
  • Page 68 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LodA b_dMV Quality: Magnitude of measured load current (service value) Timestamp: Magnitude of measured load current (service value) CtlV b_dMV mag.f BUSVOLT The average of the measured busbar voltage (service value)
  • Page 69 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description AutoCtl v1_dSPC Oper.T Command parameter for IEC61850 Oper.Test Command parameter for IEC61850 Oper.Check Command parameter for IEC61850 stVal AUTO Automatic control mode is active AUTO Quality: Automatic control mode is active...
  • Page 70 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LVA2On v1_dSPC Quality: The setting LVAConst2 is used (service value) Timestamp: The setting LVAConst2 is used (service value) LVA3On v1_dSPC Oper.ctlVal Command parameter for IEC61850 Oper.origin.orCat...
  • Page 71 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LVAReset v1_dSPC Oper.origin.orIdent Command parameter for IEC61850 Oper.ctlNum Command parameter for IEC61850 Oper.T Command parameter for IEC61850 Oper.Test Command parameter for IEC61850 Oper.Check Command parameter for...
  • Page 72 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Q1Conn v1_dSPS Quality: Reactive bank1 connected Timestamp: Reactive bank1 connected Q2Conn v1_dSPS stVal Reactive bank2 connected Quality: Reactive bank2 connected Timestamp: Reactive bank2 connected Q3Conn v1_dSPS...
  • Page 73 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description T6ParGr v1_dSPS T6PG Timestamp: Transformer6 included in parallel group T7ParGr v1_dSPS stVal T7PG Transformer7 included in parallel group T7PG Quality: Transformer7 included in parallel group T7PG Timestamp: Transformer7...
  • Page 74 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description T8Master v1_dSPS Timestamp: Transformer 8 is master Homing v1_dSPS stVal HOMING Transformer is in homing conditions HOMING Quality: Transformer is in homing conditions HOMING Timestamp: Transformer is in...
  • Page 75 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description HiABlk v1_dSPS stVal IBLK One phase current is above the settable limit IBLK Quality: One phase current is above the settable limit IBLK Timestamp: One phase current is above the settable limit...
  • Page 76 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description HuntAlm v1_dSPS HUNTING Quality: Alarm for too many contradictory tap changer operations within the time sliding window HUNTING Timestamp: Alarm for too many contradictory tap changer operations within the time sliding window...
  • Page 77 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description VCTRStatus v2_dINS ATCCOUT Timestamp: Group connection to horizontal communication and YLTCIN BndCtrAct v2_dMV mag.f Actual voltage setpoint Quality: Actual voltage setpoint Timestamp: Actual voltage setpoint LodV...
  • Page 78 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description BndCtrPar v2_dMV mag.f USETPAR Average voltage setpoint used in parallel mode USETPAR Quality: Average voltage setpoint used in parallel mode USETPAR Timestamp: Average voltage setpoint used in parallel mode BndCtrSet...
  • Page 79 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description CircV v2_dMV Quality: Calculated circulating voltage Timestamp: Calculated circulating voltage LodAIm v3_dMV mag.f ATCCOUT Group connection to horizontal communication and YLTCIN ATCCOUT Quality: Group connection to horizontal communication and...

  • Page 80: Tap Changer Control And Supervision, 6 Binary Inputs Tcmyltc And Tclyltc

    Section 7 1MRK 511 349-UEN - Logical node data model 7.2.1.2 Tap changer control and supervision, 6 binary inputs TCMYLTC and TCLYLTC LN type LN prefix LN class Function block name TCMYLTC (revision 5) TCM YLTC TCMYLTC Table 4: TCMYLTC Logical node data DO name DO type DA name...
  • Page 81 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpCnt b_dINS stVal CNT_VAL Number of operations on tap changer CNT_VAL Quality: Number of operations on tap changer CNT_VAL Timestamp: Number of operations on tap changer HiTapPos b_dINS...

  • Page 82: Logical Nodes For Control

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description CmdFlt v1_dSPS CMDERRAL Quality: Alarm for a command without an expected position change CMDERRAL Timestamp: Alarm for a command without an expected position change ConvFlt v1_dSPS...
  • Page 83 Section 7 1MRK 511 349-UEN - Logical node data model Table 5: QCBAY Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...

  • Page 84: Logical Node For Interlocking Scilo

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description BlkCmd v1_dSPC CMD_BLKD Quality: Function is blocked for commands CMD_BLKD Timestamp: Function is blocked for commands BlkUpd v1_dSPC Oper.ctlVal Special block command value used for blockUpdate Oper.origin.orCat Special block command value...

  • Page 85: Switch Controller Cswi

    Section 7 1MRK 511 349-UEN - Logical node data model Table 6: SCILO Logical node data DO name DO type DA name Signal Mon/C Description aINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...
  • Page 86 Section 7 1MRK 511 349-UEN - Logical node data model Table 7: SCSWI Logical node data DO name DO type DA name Signal Mon/C Description a_dDPC Cancel.ctlVal Command parameter for IEC61850 Cancel.origin.orCat Command parameter for IEC61850 Oper.ctlVal Command parameter for IEC61850 Oper.origin.orCat Command parameter for...
  • Page 87 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dDPC subVal Substituted double position value ctlModel CtlModel Specifies control model type a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum...

  • Page 88: Bay Reserve Function Qcrsv

    Section 7 1MRK 511 349-UEN - Logical node data model 7.3.4 Bay reserve function QCRSV LN type LN prefix LN class Function block name QCRSV (revision 0) Q CRSV QCRSV Table 8: QCRSV Logical node data DO name DO type DA name Signal Mon/C...
  • Page 89 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description PrmOp3 v1SPS RES_GRT3 Quality: Reservation is made and the app. 3 is allowed to operate RES_GRT3 Timestamp: Reservation is made and the app. 3 is allowed to operate PrmOp4 v1SPS...

  • Page 90: Logical Nodes For Conversion Functions

    Section 7 1MRK 511 349-UEN - Logical node data model Logical nodes for conversion functions 7.4.1 Integer to Boolean converter FCVB 7.4.1.1 Integer to Boolean 16 conversion with logic node representation ITBGAPC LN type LN prefix LN class Function block name IB16FCVB (revision 0) IB16 FCVB ITBGAPC...

  • Page 91: Boolean To Integer Converter Fcvi

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description ISCSO b_dINC Oper.Check Command parameter for IEC61850 stVal Integer to be converted to bit pattern OUT1 to OUT16 Quality: Integer to be converted to bit pattern OUT1 to OUT16 Timestamp: Integer to be converted to bit pattern OUT1 to...

  • Page 92: Logical Nodes For Protection Functions

    Section 7 1MRK 511 349-UEN - Logical node data model Logical nodes for protection functions 7.5.1 Differential protection PDIF 7.5.1.1 Transformer differential protection, two winding T2WPDIF LN type LN prefix LN class Function block name T2WPDIF (revision 1) T2W PDIF T2WPDIF Table 11: T2WPDIF Logical node data...
  • Page 93 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpnCTVal v1INS OCTSIDE Quality: Open CT side : 1 -> W 1 (pri), 2 -> W 2 (sec) OCTSIDE Timestamp: Open CT side : 1 -> W 1 (pri), 2 ->...
  • Page 94 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk5H v1SPS stVal BLK5H Common fifth harmonic block signal from any phase BLK5H Quality: Common fifth harmonic block signal from any phase BLK5H Timestamp: Common fifth harmonic block signal from any...
  • Page 95 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk5HPhA v1SPS BLK5HL1 Quality: Fifth harmonic block signal, phase L1 BLK5HL1 Timestamp: Fifth harmonic block signal, phase L1 Blk5HPhB v1SPS stVal BLK5HL2 Fifth harmonic block signal, phase BLK5HL2...

  • Page 96: Transformer Differential Protection, Three Winding T3Wpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description DifAlm v1SPS stVal IDALARM Alarm for sustained diff currents in all three phases IDALARM Quality: Alarm for sustained diff currents in all three phases IDALARM Timestamp: Alarm for sustained diff currents in all three phases...
  • Page 97 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description bACT TRIP Timestamp: General, common trip signal OpnCTVal v1INS stVal OCTSIDE Open CT side : 1 -> W 1 (pri), 2 -> W 2 (sec), 3 ->...
  • Page 98 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk2H v1SPS BLK2H Timestamp: Common second harmonic block signal from any phase Blk5H v1SPS stVal BLK5H Common fifth harmonic block signal from any phase BLK5H Quality: Common fifth harmonic block signal from any phase...
  • Page 99 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk5HPhA v1SPS stVal BLK5HL1 Fifth harmonic block signal, phase BLK5HL1 Quality: Fifth harmonic block signal, phase L1 BLK5HL1 Timestamp: Fifth harmonic block signal, phase L1 Blk5HPhB v1SPS...

  • Page 100: Low Impedance Restricted Earth Fault Protection Refpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description DifAlm v1SPS stVal IDALARM Alarm for sustained diff currents in all three phases IDALARM Quality: Alarm for sustained diff currents in all three phases IDALARM Timestamp: Alarm for sustained diff currents in all three phases...

  • Page 101: Generator Differential Protection Genpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk2H v1_dSPS stVal BLK2H Block due to 2-nd harmonic BLK2H Quality: Block due to 2-nd harmonic BLK2H Timestamp: Block due to 2-nd harmonic ItrFlt v1_dSPS...
  • Page 102 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 bACT general TRIP General, common trip signal TRIP Quality: General, common trip signal...
  • Page 103 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpNSSen v1SPS TRNSSENS Quality: Trip signal from sensitive neg. seq. diff. protection TRNSSENS Timestamp: Trip signal from sensitive neg. seq. diff. protection ItrFlt v1SPS stVal...

  • Page 104: 1Ph High Impedance Differential Protection Hzpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpnCTAlm v1SPS OPENCTAL Timestamp: Open CT Alarm output signal. Issued after a delay ... DifANS v2MV mag.f IDNSMAG Negative Sequence Differential current;...

  • Page 105: Busbar Differential Protection, 2 Zones, Three Phase Bcztpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dSPS ALARM Quality: Alarm signal ALARM Timestamp: Alarm signal b_dACT general TRIP Trip signal TRIP Quality: Trip signal TRIP Timestamp: Trip signal 7.5.1.6 Busbar differential protection, 2 zones, three phase BCZTPDIF LN type...

  • Page 106: Line Differential Protection, 3 Ct Sets, 23 Line Ends L3Cpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description bACT general TRIP Check zone general trip TRIP Quality: Check zone general trip TRIP Timestamp: Check zone general trip 7.5.1.8 Line differential protection, 3 CT sets, 23 line ends L3CPDIF LN type LN prefix LN class Function block name L3CPDIF (revision 2) L3C...
  • Page 107 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 OpnCTIn v1_dINS...
  • Page 108 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrRst v1_dSPS stVal STARTRES Start of restrained differential protection STARTRES Quality: Start of restrained differential protection STARTRES Timestamp: Start of restrained differential protection StrUnRst v1_dSPS...

  • Page 109: Line Differential Protection, 6 Ct Sets, 35 Line Ends L6Cpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpnCT v1_dSPS stVal OPENCT An open CT was detected OPENCT Quality: An open CT was detected OPENCT Timestamp: An open CT was detected OpnCTAlm v1_dSPS...
  • Page 110 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Oper.Test Mode parameter for 61850 Oper.Check Mode parameter for 61850 stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850...
  • Page 111 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrNSUnRst v1_dSPS stVal STARTENH Start of enhanced restrained differential protection STARTENH Quality: Start of enhanced restrained differential protection STARTENH Timestamp: Start of enhanced restrained differential protection StrRst v1_dSPS...

  • Page 112: Line Differential Protection 3 Ct Sets, With Inzone Transformers, 23 Line Ends Lt3Cpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk5HPhC v1_dSPS stVal BLK5HL3 Block signal due to 5th harmonic, phase L3 BLK5HL3 Quality: Block signal due to 5th harmonic, phase L3 BLK5HL3 Timestamp: Block signal due to 5th harmonic, phase L3...
  • Page 113 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dACT TRIP Timestamp: Common, main, trip output signal a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...
  • Page 114 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description ExFlt v1_dSPS EXTFAULT Timestamp: External fault has been detected ItrFlt v1_dSPS stVal INTFAULT Internal fault has been detected INTFAULT Quality: Internal fault has been detected INTFAULT Timestamp: Internal fault has been...

  • Page 115: Line Differential Protection 6 Ct Sets, With Inzone Transformers, 35 Line Ends Lt6Cpdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk5HPhA v1_dSPS BLK5HL1 Timestamp: Block signal due to 5th harmonic, phase L1 Blk5HPhB v1_dSPS stVal BLK5HL2 Block signal due to 5th harmonic, phase L2 BLK5HL2 Quality: Block signal due to 5th...
  • Page 116 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dACT general TRIP Common, main, trip output signal phsA TRL1 Trip signal from phase L1 phsB TRL2 Trip signal from phase L2 phsC TRL3 Trip signal from phase L3...
  • Page 117 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk5H v1_dSPS BLK5H Quality: Common block signal, due to 5-th harmonic BLK5H Timestamp: Common block signal, due to 5-th harmonic ExFlt v1_dSPS stVal EXTFAULT...

  • Page 118: Additional Security Logic For Differential Protection Rgfc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Blk5HPhA v1_dSPS BLK5HL1 Timestamp: Block signal due to 5th harmonic, phase L1 Blk5HPhB v1_dSPS stVal BLK5HL2 Block signal due to 5th harmonic, phase L2 BLK5HL2 Quality: Block signal due to 5th...
  • Page 119 Section 7 1MRK 511 349-UEN - Logical node data model Table 22: LDRGFC Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...

  • Page 120: Distance Protection Pdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StUpZroA v1_dSPS stVal ST3I0 Start signal for zero sequence current criterion ST3I0 Quality: Start signal for zero sequence current criterion ST3I0 Timestamp: Start signal for zero sequence current criterion StUpLoVol...
  • Page 121 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC Oper.ctlNum Mode parameter for 61850 Oper.T Mode parameter for 61850 Oper.Test Mode parameter for 61850 Oper.Check Mode parameter for 61850 stVal Mode status parameter for 61850 Quality: Mode status parameter for...
  • Page 122 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrFwdPhC v1SPS STFWL3 Timestamp: Fault detected in phase L3 - forward direction StrFwdGnd v1SPS stVal STFWPE Earth fault detected in forward direction STFWPE Quality: Earth fault detected in...

  • Page 123: Faulty Phase Identification With Load Encroachment Fmpspdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrNDGnd v1SPS STNDPE Timestamp: Non directional start, phase-earth Str1Ph v1SPS stVal STFW1PH Start in forward direction for single- phase fault STFW1PH Quality: Start in forward direction for single-phase fault STFW1PH...

  • Page 124: Loss Of Excitation Lexpdis

    Section 7 1MRK 511 349-UEN - Logical node data model Table 24: FMPSPDIS Logical node data DO name DO type DA name Signal Mon/C Description aACD general START Indicates that something has started phsA STL1 Fault detected in phase L1 phsB STL2 Fault detected in phase L2...
  • Page 125 Section 7 1MRK 511 349-UEN - Logical node data model Table 25: LEXPDIS Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...

  • Page 126: Distance Protection Zone, Quadrilateral Characteristic Zmqpdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrZ2 v1_dSPS STZ2 Timestamp: Start signal from impedance zone Z2 PriRis v2_dMV mag.f ROHM Resistance in Primary Ohms ROHM Quality: Resistance in Primary Ohms ROHM Timestamp: Resistance in Primary...

  • Page 127: Distance Protection Zone, Quadrilateral Characteristic Zmqapdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check Mode parameter stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status...

  • Page 128: Distance Measuring Zone, Quadrilateral Characteristic For Series Compensated Lines Zmcpdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aACT phsB TRL2 Trip signal from phase L2 phsC TRL3 Trip signal from phase L3 TRIP Quality: General Trip, issued from any phase or loop TRIP Timestamp: General Trip, issued...

  • Page 129: Distance Measuring Zone, Quadrilateral Characteristic For Series Compensated Lines Zmcapdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aACD phsB STL2 Start signal from phase L2 phsC STL3 Start signal from phase L3 START Quality: General Start, issued from any phase or loop START Timestamp: General Start, issued...
  • Page 130 Section 7 1MRK 511 349-UEN - Logical node data model Table 29: ZMCAPDIS Logical node data DO name DO type DA name Signal Mon/C Description aACD general START General Start, issued from any phase or loop dirGeneral Integer coded info about general direction of fault phsA STL1...

  • Page 131: Full-Scheme Distance Protection, Mho Characteristic Zmhpdis

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.3.8 Full-scheme distance protection, mho characteristic ZMHPDIS LN type LN prefix LN class Function block name ZMHPDIS (revision 0) ZMH PDIS ZMHPDIS Table 30: ZMHPDIS Logical node data DO name DO type DA name Signal...

  • Page 132: Fullscheme Distance Protection, Quadrilateral For Earth Faults Zmmpdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpPP v1SPS stVal TRPP Trip phase-to-phase TRPP Quality: Trip phase-to-phase TRPP Timestamp: Trip phase-to-phase OpPh v1SPS stVal TRPE Trip phase-to-earth TRPE Quality: Trip phase-to-earth TRPE Timestamp: Trip phase-to-earth...

  • Page 133: Fullscheme Distance Protection, Quadrilateral For Earth Faults Zmmapdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC Oper.Check Mode parameter stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 aINS stVal Behaviour parameter...

  • Page 134: Distance Protection Zone, Quadrilateral Characteristic, Separate Settings Zmrapdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aACT TRIP Timestamp: General Trip, issued from any phase or loop aINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T...

  • Page 135: Distance Protection Zone, Quadrilateral Characteristic, Separate Settings Zmrpdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aACD START Timestamp: General Start, issued from any phase or loop aACT general TRIP General Trip, issued from any phase or loop phsA TRL1 Trip signal from phase L1...
  • Page 136 Section 7 1MRK 511 349-UEN - Logical node data model Table 34: ZMRPDIS Logical node data DO name DO type DA name Signal Mon/C Description aACD general START General Start, issued from any phase or loop dirGeneral Integer coded info about general direction of fault phsA STL1...

  • Page 137: High Speed Distance Protection Zmfpdis

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.3.13 High speed distance protection ZMFPDIS LN type LN prefix LN class Function block name PSFPDIS instance 7 (revision 0) PDIS ZMFPDIS ZMFLLN0 instance 1 (revision 0) - LLN0 ZMFPDIS ZMFPDIS instance 1 (revision 0) PDIS ZMFPDIS...
  • Page 138 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINS Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850...
  • Page 139 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD dirGeneral Integer (binary) coded info about general direction of fault STARTZ1 Quality: Start in any phase or phases from zone 1 - forward direction STARTZ1 Timestamp: Start in any phase or...
  • Page 140 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850 Table 39: ZMFPDIS Logical node data (instance 3) DO name...
  • Page 141 Section 7 1MRK 511 349-UEN - Logical node data model Table 40: ZMFPDIS Logical node data (instance 4) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 142 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD STARTZ5 Timestamp: Start in any phase or phases from zone 5 - zone direction b_dACT general TRIPZ5 Trip in any phase or phases from zone 5 - zone direction TRIPZ5 Quality: Trip in any phase or...

  • Page 143: Phase Selection, Quadrilateral Characteristic With Settable Angle Frpspdis

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.3.14 Phase selection, quadrilateral characteristic with settable angle FRPSPDIS LN type LN prefix LN class Function block name FPSRPDIS (revision 0) FPSR PDIS FRPSPDIS Table 43: FRPSPDIS Logical node data DO name DO type DA name...
  • Page 144 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrCndZ v1INS stVal STCNDZ Start condition (Z< with LE and 3I0 E/F detection) STCNDZ Quality: Start condition (Z< with LE and 3I0 E/F detection) STCNDZ Timestamp: Start condition (Z<...
  • Page 145 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrRvPhC v1SPS stVal STRVL3 Fault detected in phase L3 - reverse direction STRVL3 Quality: Fault detected in phase L3 - reverse direction STRVL3 Timestamp: Fault detected in phase L3 - reverse direction...

  • Page 146: High Speed Distance Protection For Series Compensated Lines Zmfcpdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description RelGnd v1SPS stVal STPE Current conditions release of phase-earth measuring elements STPE Quality: Current conditions release of phase-earth measuring elements STPE Timestamp: Current conditions release of phase-earth measuring elements...
  • Page 147 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dACD phsC STNDL3 Fault detected in phase L3 - any direction dirPhsC L3Dir Direction in phase L3 STARTND Quality: Fault detected in any phase or phases - any direction STARTND Timestamp: Fault detected in any...
  • Page 148 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Timestamp: Mode status value parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 Table 46: ZMFCPDIS Logical node data (instance 1)
  • Page 149 Section 7 1MRK 511 349-UEN - Logical node data model Table 47: ZMFCPDIS Logical node data (instance 2) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 150 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD STARTZ3 Timestamp: Start in any phase or phases from zone 3 - zone direction b_dACT general TRIPZ3 Trip in any phase or phases from zone 3 - zone direction TRIPZ3 Quality: Trip in any phase or...
  • Page 151 Section 7 1MRK 511 349-UEN - Logical node data model Table 50: ZMFCPDIS Logical node data (instance 5) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...

  • Page 152: Underimpedance Protection For Generators And Transformers Zgvpdis

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT general TRIPZRV Trip in any phase or phases from zone RV - reverse dir. TRIPZRV Quality: Trip in any phase or phases from zone RV - reverse dir.
  • Page 153 Section 7 1MRK 511 349-UEN - Logical node data model Table 53: ZGVPDIS Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...
  • Page 154 Section 7 1MRK 511 349-UEN - Logical node data model Table 55: ZGVPDIS Logical node data (instance 2) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...

  • Page 155: Directional Overpower Pdop

    Section 7 1MRK 511 349-UEN - Logical node data model Table 57: ZGVPDIS Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...

  • Page 156: Directional Underpower Pdup

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter Quality: Behaviour parameter Timestamp: Behaviour parameter b_dACD general START...
  • Page 157 Section 7 1MRK 511 349-UEN - Logical node data model Table 59: GUPPDUP Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...

  • Page 158: Rate Of Change Of Frequency Pfrc

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.6 Rate of change of frequency PFRC 7.5.6.1 Rate-of-change frequency protection SAPFRC LN type LN prefix LN class Function block name SAPFRC (revision 1) SA PFRC SAPFRC Table 60: SAPFRC Logical node data DO name DO type DA name...

  • Page 159: Frequency Time Accumulation Protection Qfvr

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description RestLd v1_dSPS stVal RESTORE Restore signal for load restoring purposes RESTORE Quality: Restore signal for load restoring purposes RESTORE Timestamp: Restore signal for load restoring purposes 7.5.7 Frequency time accumulation protection QFVR...

  • Page 160: Instantaneous Overcurrent Pioc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description VarStr a_dSPS START Quality: Start signal of the function START Timestamp: Start signal of the function AccHzVaTm v1_dMV mag.f ACCTIME Accumulated time for frequency band limits ACCTIME Quality: Accumulated time for...

  • Page 161: Instantaneous Residual Overcurrent Protection Efpioc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINS stVal Behaviour parameter Quality: Behaviour parameter Timestamp: Behaviour parameter 7.5.8.2 Instantaneous residual overcurrent protection EFPIOC LN type LN prefix LN class Function block name EFPIOC (revision 0) EF PIOC EFPIOC...

  • Page 162: Protection Scheme Psch

    Section 7 1MRK 511 349-UEN - Logical node data model Table 64: ZCLCPSCH Logical node data DO name DO type DA name Signal Mon/C Description aINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...
  • Page 163 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Oper.T Mode parameter Oper.Test Mode parameter Oper.Check Mode parameter stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850...

  • Page 164: Current Reversal And Wei Logic For Distance Protection 3-Phase Zcrwpsch

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT TRIP Timestamp: Trip output StopTxBlk v1_dSPS stVal CHSTOP Stops the blocking signal to remote end CHSTOP Quality: Stops the blocking signal to remote end CHSTOP Timestamp: Stops the blocking...

  • Page 165: Scheme Communication Logic For Residual Overcurrent Protection Ecpsch

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINS Timestamp: Behaviour parameter ProRx a_dSPS stVal Teleprotection permissive signal received from remote end Quality: Teleprotection permissive signal received from remote end Timestamp: Teleprotection permissive signal received from remote end...
  • Page 166 Section 7 1MRK 511 349-UEN - Logical node data model Table 67: ECPSCH Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...

  • Page 167: Current Reversal And Weak-End Infeed Logic For Residual Overcurrent Protection Ecrwpsch

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT TRIP Quality: Trip signal by communication scheme logic TRIP Timestamp: Trip signal by communication scheme logic CarRx b_dACT general Carrier Receive from Communication Scheme Logic Quality: Carrier Receive from Communication Scheme Logic...

  • Page 168: Protection Scheme [Line Diff Logic] Ldlpsch

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description ProTx a_dSPS stVal ECHO Permissive signal transmitted as echo signal or in case of weak end infeed ECHO Quality: Permissive signal transmitted as echo signal or in case of weak end infeed ECHO...
  • Page 169 Section 7 1MRK 511 349-UEN - Logical node data model Table 69: LDLPSCH Logical node data DO name DO type DA name Signal Mon/C Description aACT general TRIP General trip from differential protection system phsA TRL1 Trip signal from phase L1 phsB TRL2 Trip signal from phase L2...

  • Page 170: Power Swing Logic Pslpsch

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpRem v2ACT general TRREMOTE Trip from remote differential function TRREMOTE Quality: Trip from remote differential function TRREMOTE Timestamp: Trip from remote differential function 7.5.10.6 Power swing logic PSLPSCH...

  • Page 171: Phase Segregated Scheme Communication Logic For Distance Protection Zc1Ppsch

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description BlkHiSetZn v1SPS stVal BLKZMOR Block trip of overreaching distance protection zones BLKZMOR Quality: Block trip of overreaching distance protection zones BLKZMOR Timestamp: Block trip of overreaching distance protection zones...
  • Page 172 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aACD Quality: Logical OR of carrier Send signal from all the three phases Timestamp: Logical OR of carrier Send signal from all the three phases CarRx aACT...

  • Page 173: Current Reversal And Weak-End Infeed Logic For Phase Segregated Communication Zc1Wpsch

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description ProRx aSPS Quality: Carrier signal received or missing carrier guard signal Timestamp: Carrier signal received or missing carrier guard signal ProTx aSPS stVal Teleprotection signal transmitted...

  • Page 174: Sensitive Directional Earth Fault Psde

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description RvABlk aACT phsC IRVOPL3 Operation of current reversal logic in Phase L3 IRVOP Quality: Operation of current reversal logic IRVOP Timestamp: Operation of current reversal logic aINC Oper.ctlVal...
  • Page 175 Section 7 1MRK 511 349-UEN - Logical node data model Table 73: SDEPSDE Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...
  • Page 176 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrResA v1_dSPS STNDIN Quality: Start of non directional residual over current STNDIN Timestamp: Start of non directional residual over current StrResV v1_dSPS stVal STUN...

  • Page 177: Switch Onto Fault Logic Psof

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.12 Switch onto fault logic PSOF 7.5.12.1 Automatic switch onto fault logic ZCVPSOF LN type LN prefix LN class Function block name ZCVPSOF (revision 3) ZCV PSOF ZCVPSOF Table 74: ZCVPSOF Logical node data DO name DO type...
  • Page 178 Section 7 1MRK 511 349-UEN - Logical node data model PH1PTOC instance 2 (revision 3) PTOC EF4PTOC PH1PTOC instance 3 (revision 3) PTOC EF4PTOC PH1PTOC instance 4 (revision 3) PTOC EF4PTOC Table 75: EF4PTOC Logical node data (instance 1) DO name DO type DA name Signal...
  • Page 179 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT TRIP Quality: General trip signal TRIP Timestamp: General trip signal c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850...
  • Page 180 Section 7 1MRK 511 349-UEN - Logical node data model Table 78: EF4PTOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 181 Section 7 1MRK 511 349-UEN - Logical node data model Table 80: EF4PTOC Logical node data (instance 2) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 182 Section 7 1MRK 511 349-UEN - Logical node data model Table 82: EF4PTOC Logical node data (instance 4) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 183 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description c_dINC stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 Table 84: OC4PTOC Logical node data (instance 1) DO name DO type...
  • Page 184 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aACD Timestamp: Common start signal from step1 aACT general Common trip signal from step1 phsA TR1L1 Trip signal from step1 phase L1 phsB TR1L2 Trip signal from step1 phase L2...
  • Page 185 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINS Timestamp: Behaviour parameter for 61850 cINC stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 Table 87: OC4PTOC Logical node data (instance 3)
  • Page 186 Section 7 1MRK 511 349-UEN - Logical node data model Table 88: OC4PTOC Logical node data (instance 4) DO name DO type DA name Signal Mon/C Description aACD general Common start signal from step4 phsA ST4L1 Start signal from step4 phase L1 phsB ST4L2 Start signal from step4 phase L2...

  • Page 187: Stub Protection Stbptoc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aACT phsB TRL2 Trip signal from phase L2 phsC TRL3 Trip signal from phase L3 TRIP Quality: Trip TRIP Timestamp: Trip aINS stVal Behaviour parameter for 61850...

  • Page 188: Broken Conductor Check Brcptoc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check Mode parameter stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850...

  • Page 189: Negative-Sequence Time Overcurrent Protection For Machines Ns2Ptoc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD START Timestamp: Start signal of the protection logic b_dACT general TRIP Operate signal of the protection logic TRIP Quality: Operate signal of the protection logic TRIP Timestamp: Operate signal of the...
  • Page 190 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 a_dSPS stVal...

  • Page 191: Three Phase Overcurrent Lcp3Ptoc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 94: NS2PTOC Logical node data (instance 2) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...

  • Page 192: Negative Sequence Overcurrent Protection Lcnsptoc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 96: LCP3PTOC Logical node data DO name DO type DA name Signal Mon/C Description a_dACD general START Common start signal phsA STL1 Start signal from phase L1 phsB STL2 Start signal from phase L2 phsC STL3...

  • Page 193: Zero Sequence Overcurrent Protection Lczsptoc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 97: LCNSPTOC Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...

  • Page 194: Four Step Directional Negative Phase Sequence Overcurrent Protection Ns4Ptoc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 98: LCZSPTOC Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...
  • Page 195 Section 7 1MRK 511 349-UEN - Logical node data model Table 99: NS4PTOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description aINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...
  • Page 196 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850 Table 101: NS4PTOC Logical node data (instance 1) DO name...
  • Page 197 Section 7 1MRK 511 349-UEN - Logical node data model Table 103: NS4PTOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 198 Section 7 1MRK 511 349-UEN - Logical node data model Table 105: NS4PTOC Logical node data (instance 3) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...

  • Page 199: Four Step Phase Overcurrent Protection Oc4Ptoc

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.13.9 Four step phase overcurrent protection OC4PTOC LN type LN prefix LN class Function block name GEN4PHAR instance 1 (revision 3) GEN4 PHAR OC4PTOC OC4LLN0 instance 1 (revision 0) LLN0 OC4PTOC PH3PTOC instance 1 (revision 0) PTOC...
  • Page 200 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC Timestamp: Mode status parameter for 61850 aINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 IvdCrv v1SPS...
  • Page 201 Section 7 1MRK 511 349-UEN - Logical node data model Table 110: OC4PTOC Logical node data (instance 2) DO name DO type DA name Signal Mon/C Description aACD general Common start signal from step2 phsA ST2L1 Start signal from step2 phase L1 phsB ST2L2 Start signal from step2 phase L2...
  • Page 202 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aACT phsC TR3L3 Trip signal from step3 phase L3 Quality: Common trip signal from step3 Timestamp: Common trip signal from step3 aINS stVal Behaviour parameter for 61850...

  • Page 203: Four Step Single Phase Overcurrent Protection Ph4Sptoc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 113: OC4PTOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description aACD general START General start signal phsA STL1 Start signal from phase L1 dirPhsA DIRL1 Direction for phase1...
  • Page 204 Section 7 1MRK 511 349-UEN - Logical node data model Table 114: PH4SPTOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 205 Section 7 1MRK 511 349-UEN - Logical node data model Table 116: PH4SPTOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 206 Section 7 1MRK 511 349-UEN - Logical node data model Table 118: PH4SPTOC Logical node data (instance 3) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...

  • Page 207: Four Step Residual Overcurrent Protection Ef4Ptoc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 120: PH4SPTOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 208 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850 aINS stVal Behaviour parameter for 61850...
  • Page 209 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpSOF v2_dACT general TRSOTF Trip signal from earth fault switch onto fault function TRSOTF Quality: Trip signal from earth fault switch onto fault function TRSOTF Timestamp: Trip signal from earth fault switch onto fault function...
  • Page 210 Section 7 1MRK 511 349-UEN - Logical node data model Table 125: EF4PTOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 211 Section 7 1MRK 511 349-UEN - Logical node data model Table 127: EF4PTOC Logical node data (instance 3) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...

  • Page 212: Sudden Change In Current Variation Sccvptoc

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.13.12 Sudden change in current variation SCCVPTOC LN type LN prefix LN class Function block name SCCVPTOC (revision 0) SCCV PTOC SCCVPTOC Table 129: SCCVPTOC Logical node data DO name DO type DA name Signal...

  • Page 213: Overvoltage Ptov

    Section 7 1MRK 511 349-UEN - Logical node data model Table 130: SAPTOF Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...

  • Page 214: Zero Sequence Overvoltage Protection Lczsptov

    Section 7 1MRK 511 349-UEN - Logical node data model Table 131: LCNSPTOV Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...

  • Page 215: Two Step Overvoltage Protection Ov2Ptov

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlNum Mode parameter for 61850 Oper.T Mode parameter for 61850 Oper.Test Mode parameter for 61850 Oper.Check Mode parameter for 61850 stVal Mode status parameter for 61850 Quality: Mode status parameter for...
  • Page 216 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check Mode parameter stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850...
  • Page 217 Section 7 1MRK 511 349-UEN - Logical node data model Table 135: OV2PTOV Logical node data (instance 2) DO name DO type DA name Signal Mon/C Description aACD general Common start signal from step2 phsA ST2L1 Start signal from step2 phase L1 phsB ST2L2 Start signal from step2 phase L2...

  • Page 218: Two Step Residual Overvoltage Protection Rov2Ptov

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.15.4 Two step residual overvoltage protection ROV2PTOV LN type LN prefix LN class Function block name GEN2LLN0 instance 1 (revision 1) LLN0 ROV2PTOV PH1PTRC instance 1 (revision 3) PTRC ROV2PTOV ROV2PTOV instance 1 (revision 1) ROV2 PTOV ROV2PTOV...
  • Page 219 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT TRIP Timestamp: Trip c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850 Table 139: ROV2PTOV Logical node data (instance 1)

  • Page 220: Voltage Differential Protection Vdcptov

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD Timestamp: Common start signal from step2 b_dACT general Common trip signal from step2 Quality: Common trip signal from step2 Timestamp: Common trip signal from step2 c_dINC stVal...

  • Page 221: Protection Trip Conditioning Ptrc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD START Timestamp: Start of voltage differential protection b_dACT general TRIP Voltage differential protection operated TRIP Quality: Voltage differential protection operated TRIP Timestamp: Voltage differential protection operated...

  • Page 222: Tripping Logic Common 3-Phase Output Smpptrc

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.16.2 Tripping logic common 3-phase output SMPPTRC LN type LN prefix LN class Function block name SMPPTRC (revision 2) SMP PTRC SMPPTRC Table 143: SMPPTRC Logical node data DO name DO type DA name Signal...

  • Page 223: Thermal Overload Pttr

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LORs v1SPC Oper.Check Command parameter for IEC61850 SPTr v1SPS stVal TR1P Tripping single-pole TR1P Quality: Tripping single-pole TR1P Timestamp: Tripping single-pole TwoPTr v1SPS stVal...
  • Page 224 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 AlmThm a_dSPS stVal ALARM Alarm signal ALARM Quality: Alarm signal ALARM...

  • Page 225: Thermal Overload Protection, One Time Constant, Fahrenheit Lfpttr

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SenFlt v1_dSPS Timestamp: Error signal from the temperature sensor TmpAmb v2_dMV mag.f TEMPAMB Ambient temperature used in the calculations TEMPAMB Quality: Ambient temperature used in the calculations TEMPAMB Timestamp: Ambient temperature...

  • Page 226: Thermal Overload Protection, Two Time Constants Trpttr

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT TRIP Quality: Trip TRIP Timestamp: Trip b_dMV mag.f TEMP Calculated temperature of the device TEMP Quality: Calculated temperature of the device TEMP Timestamp: Calculated temperature of the device...
  • Page 227 Section 7 1MRK 511 349-UEN - Logical node data model Table 146: TRPTTR Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...

  • Page 228: Rotor Overload Protection Grpttr

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description TmmOp v2_dMV TTRIP Quality: Estimated time to trip (in min) TTRIP Timestamp: Estimated time to trip (in min) TmmRsLO v2_dMV mag.f TRESLO Estimated time to reset of the function (in min)
  • Page 229 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Timestamp: Mode status value parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...

  • Page 230: Stator Overload Protection Gspttr

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpAUn v2_dACT TRIPUC Timestamp: Trip signal from under-current feature TmpPct v2_dMV mag.f THETA Overload in percent of set trip level (i.e. Trip=100%) THETA Quality: Overload in percent of set trip level (i.e.

  • Page 231: Three Phase Undercurrent Ptuc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT TRIP Quality: General trip signal from the function TRIP Timestamp: General trip signal from the function BlkGnStr v1_dSPS stVal BLKRECL Block machine closing command BLKRECL Quality: Block machine closing...

  • Page 232: Undervoltage Ptuv

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dACT TRIP Timestamp: Common trip signal a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...
  • Page 233 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Oper.Check Mode parameter stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter...
  • Page 234 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dACT phsB TR1L2 Trip signal from step1 phase L2 phsC TR1L3 Trip signal from step1 phase L3 Quality: Common trip signal from step1 Timestamp: Common trip signal from step1...

  • Page 235: Loss Of Voltage Check Lovptuv

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.19.2 Loss of voltage check LOVPTUV LN type LN prefix LN class Function block name LOVPTUV (revision 2) LOV PTUV LOVPTUV Table 154: LOVPTUV Logical node data DO name DO type DA name Signal Mon/C...
  • Page 236 Section 7 1MRK 511 349-UEN - Logical node data model Table 155: SAPTUF Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...

  • Page 237: Volts Per Hz Pvph

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.21 Volts per Hz PVPH 7.5.21.1 Overexcitation protection OEXPVPH LN type LN prefix LN class Function block name OEXPVPH (revision 3) OEX PVPH OEXPVPH Table 156: OEXPVPH Logical node data DO name DO type DA name...

  • Page 238: Multipurpose Analog Protection Gapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description GenFctFlt v1_dSPS Quality: Out of measuring range for voltage or frequency Timestamp: Out of measuring range for voltage or frequency VHzRat v2_dMV mag.f VPERHZ...

  • Page 239: Status Of Primary Switching Object For Busbar Protection Zone Selection Bdcgapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD START Quality: Start signal from accidental energizing of generator protection START Timestamp: Start signal from accidental energizing of generator protection b_dACT general TRIP...

  • Page 240: Capacitor Bank Protection Cbpgapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 bSPS stVal ALARM Delayed alarm for abnormal aux. contact status, 00 or 11 ALARM Quality: Delayed alarm for...
  • Page 241 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Oper.Check Mode parameter for 61850 stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850 a_dINS stVal...
  • Page 242 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description VRMSPhA v2_dMV mag.f URMSL1 Calculated voltage RMS for phase URMSL1 Quality: Calculated voltage RMS for phase L1 URMSL1 Timestamp: Calculated voltage RMS for phase L1 VRMSPhB v2_dMV...
  • Page 243 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT general TRIP General trip signal TRIP Quality: General trip signal TRIP Timestamp: General trip signal c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850...
  • Page 244 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850 Table 163: CBPGAPC Logical node data (instance 1) DO name...
  • Page 245 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT TRHOL Timestamp: Trip signal for harmonic over load c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850...
  • Page 246 Section 7 1MRK 511 349-UEN - Logical node data model Table 166: CBPGAPC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dACD general STUC Start signal for under current phsA STUCL1 Start signal for under current of phase L1 phsB STUCL2...

  • Page 247: Compensated Over- And Undervoltage Protection Couvgapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dACD STQOL Quality: Start signal for reactive power over load STQOL Timestamp: Start signal for reactive power over load a_dACT general TRQOL Trip signal for reactive power over load...
  • Page 248 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Timestamp: Mode status value parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 Table 169: COUVGAPC Logical node data (instance 1)

  • Page 249: General Currrent And Voltage Protection Cvgapc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 170: COUVGAPC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dACT general TRUV Common trip signal for compensated under voltage phsA TRUVL1 Trip signal for compensated under voltage of phase 1 phsB TRUVL2...
  • Page 250 Section 7 1MRK 511 349-UEN - Logical node data model GF2PTUC instance 2 (revision 2) PTUC CVGAPC GF2PTUV instance 1 (revision 2) PTUV CVGAPC GF2PTUV instance 2 (revision 2) PTUV CVGAPC GF2PVOC instance 1 (revision 2) PVOC CVGAPC GF2PVOC instance 2 (revision 2) PVOC CVGAPC PH1PTRC instance 1 (revision 3)
  • Page 251 Section 7 1MRK 511 349-UEN - Logical node data model Table 172: CVGAPC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description aINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 mag.f CURRENT...
  • Page 252 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD BLK2ND Timestamp: Block from second harmonic detection c_dINC stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 Table 174:...
  • Page 253 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD STOV2 Quality: Start signal from overvoltage function OV2 STOV2 Timestamp: Start signal from overvoltage function OV2 b_dACT general TROV2 Trip signal from overvoltage function OV2 TROV2 Quality: Trip signal from...
  • Page 254 Section 7 1MRK 511 349-UEN - Logical node data model Table 177: CVGAPC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 255 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description c_dINC stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 Table 179: CVGAPC Logical node data (instance 2) DO name DO type...
  • Page 256 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD STOC2 Quality: Start signal from overcurrent function OC2 STOC2 Timestamp: Start signal from overcurrent function OC2 b_dACT general TROC2 Trip signal from overcurrent function OC2 TROC2 Quality: Trip signal from...

  • Page 257: Low Active Power And Power Factor Protection Lappgapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description c_dINC Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 IvdCrv v1_dSPS stVal Error signal from overcurrent function OC1 Quality: Error signal from overcurrent function OC1 Timestamp: Error signal from...
  • Page 258 Section 7 1MRK 511 349-UEN - Logical node data model Table 183: LAPPGAPC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...

  • Page 259: Mho Impedance Supervision Logic Zsmgapc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 185: LAPPGAPC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dACD general STLPF Start low power factor phsA STLPFL1 Start low power factor phase 1 phsB STLPFL2 Start low power factor phase 2...

  • Page 260: Radial Feeder Protection Papgapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 aINS stVal Behaviour parameter Quality: Behaviour parameter Timestamp: Behaviour parameter...
  • Page 261 Section 7 1MRK 511 349-UEN - Logical node data model Table 187: PAPGAPC Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...

  • Page 262: Out-Of-Step Protection Ppam

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.23 Out-of-step protection PPAM 7.5.23.1 Out-of-step protection OOSPPAM LN type LN prefix LN class Function block name OOSPPAM (revision 1) OOS PPAM OOSPPAM Table 188: OOSPPAM Logical node data DO name DO type DA name Signal...

  • Page 263: Poleslip/Out-Of-Step Protection Pspppam

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Zn1SlpDet v1_dSPS TRIPZ1 Timestamp: Zone 1 trip Zn2SlpDet v1_dSPS stVal TRIPZ2 Zone 2 trip TRIPZ2 Quality: Zone 2 trip TRIPZ2 Timestamp: Zone 2 trip v1_dSPS stVal GENMODE...
  • Page 264 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD general START Common start signal dirGeneral START Common start signal START Quality: Common start signal START Timestamp: Common start signal b_dACT general TRIP...

  • Page 265: Earth Fault Protection Phiz

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SlpZOhm v2_dMV SLIPZOHM Timestamp: Slip impedance in ohms CosUkV v2_dMV mag.f UCOS UCosPhi voltage UCOS Quality: UCosPhi voltage UCOS Timestamp: UCosPhi voltage 7.5.24 Earth fault protection PHIZ 7.5.24.1...

  • Page 266: 100% Stator Earth Fault Protection, 3Rd Harmonic Based Stefphiz

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACT TRIP Quality: Trip (common AC and DC side of exciter) TRIP Timestamp: Trip (common AC and DC side of exciter) ErrorSt v1_dINS stVal...
  • Page 267 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlNum Mode parameter for 61850 Oper.T Mode parameter for 61850 Oper.Test Mode parameter for 61850 Oper.Check Mode parameter for 61850 stVal Mode status parameter for 61850 Quality: Mode status parameter for...
  • Page 268 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description StrUN v1_dSPS STARTUN Timestamp: Start signal by fund. freq. neutral over-voltage prot. VT3rdH v2_dMV mag.f Mag. of 3rd harm. voltage at generator terminal side, Volts Quality: Mag.

  • Page 269: 100% Stator Earth Fault Protection, Injection Based Sttiphiz

    Section 7 1MRK 511 349-UEN - Logical node data model 7.5.24.3 100% stator earth fault protection, injection based STTIPHIZ LN type LN prefix LN class Function block name STTIPHIZ (revision 1) STTI PHIZ STTIPHIZ Table 192: STTIPHIZ Logical node data DO name DO type DA name...

  • Page 270: Voltage-Restrained Time Overcurrent Pvoc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Error v1_dSPS stVal ERROR Error ERROR Quality: Error ERROR Timestamp: Error 7.5.25 Voltage-restrained time overcurrent PVOC LN type LN prefix LN class Function block name PH1PTRC instance 1 (revision 3) PH1 PTRC VRPVOC...
  • Page 271 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD general STUV Start signal from undervoltage function STUV Quality: Start signal from undervoltage function STUV Timestamp: Start signal from undervoltage function b_dACT general TRUV...

  • Page 272: System Logical Nodes

    Section 7 1MRK 511 349-UEN - Logical node data model Table 196: VRPVOC Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 b_dACD general...
  • Page 273 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description AuthFail a_dSEC Timestamp: Mapping tag a_dSEC Mapping tag Timestamp: Mapping tag SvcViol a_dSEC Mapping tag Timestamp: Mapping tag c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850...

  • Page 274: Physical Device Information Lphd

    Section 7 1MRK 511 349-UEN - Logical node data model 7.6.2 Physical device information LPHD LN type LN prefix LN class Function block name LPHD (revision 6) - LPHD LPHD Table 199: LPHD Logical node data DO name DO type DA name Signal Mon/C...

  • Page 275: Dual Ethernet Port Link Status Prpstatus

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description NamPlt ln0_dLPL swRev Firmware version Health n_dINS stVal Physical health Quality: Physical health Timestamp: Physical health 7.6.4 Dual ethernet port link status PRPSTATUS LN type LN prefix LN class Function block name RCHLCCH (revision 1) RCH...

  • Page 276: Logical Nodes For Protection Related Functions

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description RedFerCh b_dINS stVal PRP-B Error Rate Quality: PRP-B Error Rate Timestamp: PRP-B Error Rate Logical nodes for protection related functions 7.7.1 Breaker failure RBRF LN type LN prefix LN class Function block name...

  • Page 277: Breaker Failure Protection, Single Phase Version Ccsrbrf

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINS Timestamp: Behaviour parameter OpEx bACT general TRBU Back-up trip by breaker failure protection function TRBU Quality: Back-up trip by breaker failure protection function TRBU Timestamp: Back-up trip by...

  • Page 278: Differential Supervision Rdif

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpEx bACT TRBU Timestamp: Back-up trip by breaker failure protection OpIn bACT general TRRET Retrip by breaker failure protection TRRET Quality: Retrip by breaker failure protection TRRET Timestamp: Retrip by breaker...

  • Page 279: Disturbance Recorder Rdre

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description bACT FAIL Quality: Detection of current circuit failure FAIL Timestamp: Detection of current circuit failure v1SPS stVal ALARM Alarm for current circuit failure ALARM Quality: Alarm for current circuit failure...

  • Page 280: Fault Locator Rflo

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description FltNum b_dINS stVal FaultNumber Disturbance fault number FaultNumber Quality: Disturbance fault number FaultNumber Timestamp: Disturbance fault number 7.7.4 Fault locator RFLO 7.7.4.1 Fault locator LMBRFLO LN type...

  • Page 281: Secondary System Supervision Spvc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description FltLoop e_dINS stVal FLT_LOOP Fault loop FLT_LOOP Quality: Fault loop FLT_LOOP Timestamp: Fault loop ClcFlt v1_dSPS stVal CALCMADE Fault calculation made CALCMADE Quality: Fault calculation made CALCMADE...

  • Page 282: Fuse Failure Supervision Based On Voltage Difference Vdspvc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Str3Ph v2ACD Timestamp: Three-phase start of function v2ACD general BLKU General start of function BLKU Quality: General start of function BLKU Timestamp: General start of function StrRst...

  • Page 283: Pole Discordance Protection Rpld

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Timestamp: Mode status value parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 AlmRef v1_dACD...

  • Page 284: Power Swing Detection Rpsb

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINS Quality: Behaviour parameter Timestamp: Behaviour parameter bACT general TRIP Trip signal to CB TRIP Quality: Trip signal to CB TRIP Timestamp: Trip signal to CB v2ACD general...

  • Page 285: Autoreclosing Rrec

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description b_dACD general START Power swing detected START Quality: Power swing detected START Timestamp: Power swing detected ZOuter v1_dSPS stVal ZOUT Measured impedance within outer impedance boundary ZOUT Quality: Measured impedance...
  • Page 286 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description bACT general CLOSECB Closing command for CB CLOSECB Quality: Closing command for CB CLOSECB Timestamp: Closing command for BlkRec bSPC stVal BLOCKED The AR is in blocked state BLOCKED...
  • Page 287 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Rec35Cnt v1INS stVal COUNT3P5 Counting the number of three- phase reclosing shot 5 COUNT3P5 Quality: Counting the number of three-phase reclosing shot 5 COUNT3P5 Timestamp: Counting the number of three-phase reclosing shot 5...
  • Page 288 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SucRec v1SPS SUCCL Timestamp: Activated if CB closes during the time tUnsucCl UnsRec v1SPS stVal UNSUCCL Reclosing unsuccessful, signal resets after the reclaim time UNSUCCL Quality: Reclosing unsuccessful, signal resets after the reclaim time...

  • Page 289: Synchronising Rsyn

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description PrgRec34 v1SPS 3PT4 Quality: Three-phase reclosing in progress, shot 4 3PT4 Timestamp: Three-phase reclosing in progress, shot 4 PrgRec35 v1SPS stVal 3PT5 Three-phase reclosing in progress, shot 5...
  • Page 290 Section 7 1MRK 511 349-UEN - Logical node data model Table 212: SESRSYN Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 a_dSPS stVal...
  • Page 291 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description c_dINC stVal Mode status value parameter for 61850 Quality: Mode status value parameter for 61850 Timestamp: Mode status value parameter for 61850 EnOK v1_dSPS stVal...
  • Page 292 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description AngInd a_dSPS PHDIFFM Timestamp: Phase angle difference out of limit for Manual Operation VInd a_dSPS stVal UDIFFSC Voltage difference out of limit UDIFFSC Quality: Voltage difference out of limit...
  • Page 293 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINS Timestamp: Behaviour parameter for 61850 Bus1Sel v1_dSPS stVal B1SEL Bus1 selected B1SEL Quality: Bus1 selected B1SEL Timestamp: Bus1 selected Bus2Sel v1_dSPS stVal B2SEL...
  • Page 294 Section 7 1MRK 511 349-UEN - Logical node data model Table 215: SESRSYN Logical node data (instance 3) DO name DO type DA name Signal Mon/C Description a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 a_dSPS stVal...

  • Page 295: Logical Nodes For Generic References

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description HzInBndSyn v1_dSPS stVal FRDIFFOK Frequency difference in band for synchronizing FRDIFFOK Quality: Frequency difference in band for synchronizing FRDIFFOK Timestamp: Frequency difference in band for synchronizing HzRCIndSyn v1_dSPS...
  • Page 296 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINS Timestamp: Behaviour parameter IntIn b_dINS stVal SWPOSN Switch position (integer) SWPOSN Quality: Switch position (integer) SWPOSN Timestamp: Switch position (integer) SPCCO v2_dSPC Oper.ctlVal...

  • Page 297: Selector Mini Switch Vsgapc

    Section 7 1MRK 511 349-UEN - Logical node data model 7.8.1.2 Selector mini switch VSGAPC LN type LN prefix LN class Function block name VSGGIO (revision 1) VS GGIO VSGAPC Table 217: VSGAPC Logical node data DO name DO type DA name Signal Mon/C...

  • Page 298: Generic Communication Function For Double Point Indication Dpgapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description DPCSO d_dDPC SBOw.ctlNum Command parameter for IEC61850 SBOw.T Command parameter for IEC61850 Cancel.T Command parameter for IEC61850 Oper.T Command parameter for IEC61850 Oper.Test Command parameter for...

  • Page 299: Single Point Generic Control 8 Signals Spc8Gapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description aINC stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 aINS stVal Behaviour parameter Quality: Behaviour parameter Timestamp: Behaviour parameter...
  • Page 300 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SPCSO1 d_dSPC Oper.origin.orCat Command parameter for IEC61850 Oper.origin.orIdent Command parameter for IEC61850 Oper.ctlNum Command parameter for IEC61850 Oper.T Command parameter for IEC61850 Oper.Test Command parameter for...
  • Page 301 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SPCSO4 d_dSPC Oper.T Command parameter for IEC61850 Oper.Test Command parameter for IEC61850 Oper.Check Command parameter for IEC61850 SPCSO5 d_dSPC Oper.ctlVal Command parameter for IEC61850 Oper.origin.orCat Command parameter for...

  • Page 302: Event Counter With Limit Supervision L4Ufcnt

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SPCSO8 d_dSPC Oper.ctlVal Command parameter for IEC61850 Oper.origin.orCat Command parameter for IEC61850 Oper.origin.orIdent Command parameter for IEC61850 Oper.ctlNum Command parameter for IEC61850 Oper.T Command parameter for...

  • Page 303: Iec61850 Generic Communication I/O Functions Spggio

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINS Timestamp: Behaviour parameter for 61850 RsCnt v1_dSPC Oper.ctlVal Command parameter for IEC61850 Oper.origin.orCat Command parameter for IEC61850 Oper.origin.orIdent Command parameter for IEC61850 Oper.ctlNum Command parameter for...

  • Page 304: Iec61850 Generic Communication I/O Functions 16 Inputs Sp16Ggio

    Section 7 1MRK 511 349-UEN - Logical node data model Table 221: SPGAPC Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...
  • Page 305 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850 c_dSPS stVal...

  • Page 306: Generic Communication Function For Measured Value Mvgapc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Ind12 c_dSPS stVal OUT12 Output 12 status OUT12 Quality: Output 12 status OUT12 Timestamp: Output 12 status Ind13 c_dSPS stVal OUT13 Output 13 status OUT13 Quality: Output 13 status...

  • Page 307: Pulse-Counter Logic Pcfcnt

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850 Timestamp: Behaviour parameter for 61850...

  • Page 308: Trip Matrix Logic Tmagapc

    Section 7 1MRK 511 349-UEN - Logical node data model Table 224: PCFCNT Logical node data DO name DO type DA name Signal Mon/C Description aINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...

  • Page 309: Elapsed Time Integrator With Limit Transgression And Overflow Supervision Teiggio

    Section 7 1MRK 511 349-UEN - Logical node data model LN type LN prefix LN class Function block name TMAGGIO (revision 0) TMA GGIO TMAGAPC Table 225: TMAGAPC Logical node data DO name DO type DA name Signal Mon/C Description aINC Oper.ctlVal Mode parameter...
  • Page 310 Section 7 1MRK 511 349-UEN - Logical node data model Table 226: TEIGAPC Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter for 61850 Oper.origin.orCat Mode parameter for 61850 Oper.origin.orIdent Mode parameter for 61850 Oper.ctlNum Mode parameter for 61850 Oper.T...

  • Page 311: Logical Nodes For Metering And Measurement

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description v1_dSPS WARNING Timestamp: Indicator of the integrated time has reached the warning limit AccTms v2_dMV mag.f ACCTIME Integrated elapsed time in seconds ACCTIME Quality: Integrated elapsed time in...
  • Page 312 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SupRs v1_dSPC Oper.origin.orCat Command parameter for IEC61850 Oper.origin.orIdent Command parameter for IEC61850 Oper.ctlNum Command parameter for IEC61850 Oper.T Command parameter for IEC61850 Oper.Test Command parameter for...
  • Page 313 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description VArhFwdAlm v1_dSPS ERFALM Quality: Alarm for reactive forward energy exceed limit in set interval ERFALM Timestamp: Alarm for reactive forward energy exceed limit in set interval VArhRvAlm v1_dSPS...

  • Page 314: Non Phase Related Measurement Mmxn

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description MaxVArFwdD v2_dMV MAXPRFD Timestamp: Maximum forward reactive power demand value for set interval MaxVArRvDm v2_dMV mag.f MAXPRRD Maximum reactive power demand value in reverse direction MAXPRRD Quality: Maximum reactive power...
  • Page 315 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850...
  • Page 316 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dMV subEna Enable substitution FrDbRepInt Cycl: Report interval (s), Db: In % of range, Int Db: In %s zeroDb FrZeroDb Zero point clamping in 0,001% of range PwrFact a_dMV...
  • Page 317 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description VolAmp a_dMV mag.f Apparent Power magnitude of deadband value rangeC.hhLim.f SHiHiLim High High limit in % of SBase rangeC.hLim.f SHiLim High limit in % of SBase rangeC.lLim.f SLowLim Low limit in % of SBase...

  • Page 318: Measurement Mmxu

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description Watt a_dMV rangeC.llLim.f PLowLowLim Low Low limit in % of SBase rangeC.max.f PMax Maximum value in % of SBase rangeC.min.f PMin Minimum value in % of SBase subMag.f Substituted value...
  • Page 319 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC stVal Mode status parameter for 61850 Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter for 61850 Quality: Behaviour parameter for 61850...

  • Page 320: Phase-Phase Voltage Measurement Vmmxu

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description k_dWYE Quality: IL2 Amplitude, magnitude of reported value Quality: IL1 Amplitude, magnitude of reported value Timestamp: IL1 Amplitude, magnitude of reported value Timestamp: IL2 Amplitude, magnitude of reported value Timestamp: IL3 Amplitude,...
  • Page 321 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dDEL rangeC.llLim.f UL23LowLowLim Low Low limit in % of UBase rangeC.max.f UL23Max Maximum value in % of UBase rangeC.min.f UL23Min Minimum value in % of UBase cVal.mag.f UL23 UL23 Amplitude, magnitude of...

  • Page 322: Phase-Neutral Voltage Measurement Vnmmxu

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlNum Mode parameter for 61850 Oper.T Mode parameter for 61850 Oper.Test Mode parameter for 61850 Oper.Check Mode parameter for 61850 stVal Mode status parameter for 61850 Quality: Mode status parameter for...
  • Page 323 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description k_dWYE rangeC.hLim.f UL1HiLim High limit in % of UBase rangeC.lLim.f UL1LowLim Low limit in % of UBase rangeC.llLim.f UL1LowLowLim Low Low limit in % of UBase rangeC.max.f UL1Max Maximum value in % of UBase...

  • Page 324: Sequence And Imbalance Msqi

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description k_dWYE subEna Enable substitution subEna Enable substitution UL1DbRepInt Cycl: Report interval (s), Db: In % of range, Int Db: In %s UL3DbRepInt Cycl: Report interval (s), Db: In % of range, Int Db: In %s...
  • Page 325 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SeqA b_dSEQ rangeC.llLim.f 3I0LowLowLim Low Low limit in % of IBase rangeC.max.f 3I0Max Maximum value in % of IBase rangeC.min.f 3I0Min Minimum value in % of IBase cVal.mag.f 3I0 Amplitude, magnitude of...

  • Page 326: Voltage Sequence Measurement Vmsqi

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SeqA b_dSEQ 3I0DbRepInt Cycl: Report interval (s), Db: In % of range, Int Db: In %s I2DbRepInt Cycl: Report interval (s), Db: In % of range, Int Db: In %s I1DbRepInt Cycl: Report interval (s), Db: In %...
  • Page 327 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SeqV b_dSEQ rangeC.llLim.f U1LowLowLim Low Low limit in % of UBase rangeC.max.f U1Max Maximum value in % of UBase rangeC.min.f U1Min Minimum value in % of UBase cVal.mag.f U1 Amplitude, magnitude of...

  • Page 328: Logical Nodes For Sensors And Monitoring

    Section 7 1MRK 511 349-UEN - Logical node data model 7.10 Logical nodes for sensors and monitoring 7.10.1 Circuit breaker monitoring SCBR 7.10.1.1 Breaker monitoring SSCBR LN type LN prefix LN class Function block name SSCBR (revision 3) S SCBR SSCBR Table 234: SSCBR Logical node data...
  • Page 329 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description RsAccAPwr v1_dSPC Oper.origin.orCat Command parameter for IEC61850 Oper.origin.orIdent Command parameter for IEC61850 Oper.ctlNum Command parameter for IEC61850 Oper.T Command parameter for IEC61850 Oper.Test Command parameter for...
  • Page 330 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description RsSprChaTm v1_dSPC Oper.T Command parameter for IEC61850 Oper.Test Command parameter for IEC61850 Oper.Check Command parameter for IEC61850 OpnAlm v1_dSPS stVal TRVTOPAL CB open travel time exceeded set value TRVTOPAL...
  • Page 331 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LonTmAlm v1_dSPS stVal MONALM CB 'not operated for long time' alarm MONALM Quality: CB 'not operated for long time' alarm MONALM Timestamp: CB 'not operated for long time' alarm SprChaAlm...

  • Page 332: Insulation Medium Supervision (Gas) Simg

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description TmmsOpn v2_dMV mag.f TTRVOP Travel time of the CB during opening operation TTRVOP Quality: Travel time of the CB during opening operation TTRVOP Timestamp: Travel time of the CB during opening operation...
  • Page 333 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlNum Mode parameter for 61850 Oper.T Mode parameter for 61850 Oper.Test Mode parameter for 61850 Oper.Check Mode parameter for 61850 stVal Mode status parameter for 61850 Quality: Mode status parameter for...

  • Page 334: Insulation Medium Supervision (Liquid) Siml

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description LORs v1_dSPC Oper.ctlNum Command parameter for IEC61850 Oper.T Command parameter for IEC61850 Oper.Test Command parameter for IEC61850 Oper.Check Command parameter for IEC61850 TmpLO v1_dSPS...
  • Page 335 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description InsAlm a_dSPS LVL_LO Quality: Level below lockout level LVL_LO Timestamp: Level below lockout level PresAlm a_dSPS stVal LVL_ALM Level below alarm level LVL_ALM Quality: Level below alarm level LVL_ALM...

  • Page 336: Logical Nodes For Switchgear

    Section 7 1MRK 511 349-UEN - Logical node data model 7.11 Logical nodes for switchgear 7.11.1 Circuit breaker XCBR 7.11.1.1 Circuit breaker SXCBR LN type LN prefix LN class Function block name SXCBR (revision 1) S XCBR SXCBR Table 237: SXCBR Logical node data DO name DO type...
  • Page 337 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description BlkOpn a_dSPC Oper.ctlVal Special block command value Oper.origin.orCat Special block command value Oper.origin.orIdent Special block command value Oper.ctlNum Special block command value Oper.T Special block command value Oper.Test...

  • Page 338: Switch Xswi

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description BlkUpd v1_dSPC Oper.T Special block command value Oper.Test Special block command value Oper.Check Special block command value stVal UPD_BLKD Update of position indication is blocked UPD_BLKD Quality: Update of position...
  • Page 339 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description BlkCls a_dSPC Oper.T Special block command value Oper.Test Special block command value Oper.Check Special block command value stVal CL_BLKD Indication that the function is blocked for close commands CL_BLKD Quality: Indication that the function...

  • Page 340: Logical Nodes For Power Transformers

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description SwOpCap f_dINS SWOPCAP Quality: Switch operating capability 1 = None, 2 = O, 3 = C, 4 = O and C SWOPCAP Timestamp: Switch operating capability 1 = None, 2 = O, 3 = C, 4...
  • Page 341 Section 7 1MRK 511 349-UEN - Logical node data model Table 239: TCMYLTC Logical node data DO name DO type DA name Signal Mon/C Description a_dINC Oper.ctlVal Mode parameter Oper.origin.orCat Mode parameter Oper.origin.orIdent Mode parameter Oper.ctlNum Mode parameter Oper.T Mode parameter Oper.Test Mode parameter Oper.Check...
  • Page 342 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description HiTapPos b_dINS Timestamp: Tap position for highest voltage LoTapPos b_dINS stVal Tap position for lowest voltage Quality: Tap position for lowest voltage Timestamp: Tap position for lowest voltage...

  • Page 343: Tap Changer Control And Supervision, 32 Binary Inputs Tclyltc

    Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description InvPosChg v1_dSPS stVal INVALPOS Last position change was an invalid change INVALPOS Quality: Last position change was an invalid change INVALPOS Timestamp: Last position change was an invalid change TapChgFlt...
  • Page 344 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description a_dINC Quality: Mode status parameter for 61850 Timestamp: Mode status parameter for 61850 a_dINS stVal Behaviour parameter Quality: Behaviour parameter Timestamp: Behaviour parameter EndPosR a_dSPS stVal...
  • Page 345 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description OpRs v1_dSPC Oper.origin.orIdent Command parameter for IEC61850 Oper.ctlNum Command parameter for IEC61850 Oper.T Command parameter for IEC61850 Oper.Test Command parameter for IEC61850 Oper.Check Command parameter for...
  • Page 346 Section 7 1MRK 511 349-UEN - Logical node data model DO name DO type DA name Signal Mon/C Description TapChgFlt v1_dSPS TCERRAL Timestamp: Alarm for none or illegal tap position change TapPosFlt v1_dSPS stVal POSERRAL Alarm that indicates a problem with the position indication POSERRAL Quality: Alarm that indicates a...

  • Page 347: Section 8 Goose Receive Blocks

    Section 8 1MRK 511 349-UEN - GOOSE receive blocks Section 8 GOOSE receive blocks Interlock receive - INTLKRCV 8.1.1 Horizontal communication via GOOSE for interlocking GOOSEINTLKRCV LN type LN prefix LN class Function block name INTGREC instance 1 (revision 0) INT GREC GOOSEINTLKRCV Table 241:...

  • Page 348: Binary Receive - Binrcv

    Section 8 1MRK 511 349-UEN - GOOSE receive blocks DO name DO type DA name Signal Mon/C Description TagApp14 a_dDPS stVal Internal parameter tag to handle 61850 mapping TagApp15 a_dDPS stVal Internal parameter tag to handle 61850 mapping TagReservR a_dSPS stVal Internal parameter tag to handle 61850 mapping...

  • Page 349: Vctr Receive - Vctrrcv

    Section 8 1MRK 511 349-UEN - GOOSE receive blocks DO name DO type DA name Signal Mon/C Description TagBinOu11 a_dSPS stVal Internal parameter tag to handle 61850 mapping TagBinOu12 a_dSPS stVal Internal parameter tag to handle 61850 mapping TagBinOu13 a_dSPS stVal Internal parameter tag to handle 61850 mapping...

  • Page 350: Double Point Receive (Dp) - Dprcv

    Section 8 1MRK 511 349-UEN - GOOSE receive blocks DO name DO type DA name Signal Mon/C Description In_BusV V12_dMV Timestamp: Busbar voltage (horizontal communication) In_SetV V13_dMV mag.f Voltage setpoint (horizontal communication) Quality: Voltage setpoint (horizontal communication) Timestamp: Voltage setpoint (horizontal communication) In_PosRel V14_dMV...

  • Page 351: Integer Receive - Intrcv

    Section 8 1MRK 511 349-UEN - GOOSE receive blocks Integer Receive - INTRCV 8.5.1 GOOSE function block to receive an integer value GOOSEINTRCV LN type LN prefix LN class Function block name INTSGREC instance 1 (revision 0) INTS GREC GOOSEINTRCV Table 245: GOOSEINTRCV Logical node data (instance 1) DO name...
  • Page 352 Section 8 1MRK 511 349-UEN - GOOSE receive blocks Table 247: GOOSESPRCV Logical node data (instance 1) DO name DO type DA name Signal Mon/C Description TagBinOut a_dSPS stVal Internal parameter tag to handle 61850 mapping Quality: Internal parameter tag to handle 61850 mapping 670 series 2.1 IEC Communication protocol manual...

  • Page 353: Section 9 Flexible Product Naming

    Section 9 1MRK 511 349-UEN - Flexible product naming Section 9 Flexible product naming The Flexible Product Naming tool in PCM600 allows the customer to use an IED- vendor independent 61850 model of the IED. This customer model will be exposed in all IEC 61850 communication, but all other aspects of the IED will remain unchanged (e.g., names on the local HMI and names in the tools).

  • Page 354: Mapping Possibilities And Requirements

    Section 9 1MRK 511 349-UEN - Flexible product naming GUID-439CEFCC-E5E7-4347-8260-585C673955B0 V1 EN This results in L1PTOC is mapped to FunctionB and L2PTOC is mapped to FunctionA. 9.1.2 Mapping possibilities and requirements The mapping between the IED model and the customer model provides a set of possibilities but also include some requirements.
  • Page 355 Section 9 1MRK 511 349-UEN - Flexible product naming There are also some consequences that must be thought about when doing the mapping for example, • If two DOs in one LN in the customer model are mapped to DOs in different LNs in the IED model the DOs in the customer model might be inconsistent with respect to quality in the case of different operational states of the IED Functions.

  • Page 357: Section 10 Glossary

    Section 10 1MRK 511 349-UEN - Glossary Section 10 Glossary 10.1 Glossary Alternating current Actual channel Application configuration tool within PCM600 A/D converter Analog-to-digital converter ADBS Amplitude deadband supervision Analog digital conversion module, with time synchronization Analog input ANSI American National Standards Institute Autoreclosing ASCT Auxiliary summation current transformer...
  • Page 358 Section 10 1MRK 511 349-UEN - Glossary Circuit breaker Combined backplane module CCITT Consultative Committee for International Telegraph and Telephony. A United Nations-sponsored standards body within the International Telecommunications Union. CAN carrier module CCVT Capacitive Coupled Voltage Transformer Class C Protection Current Transformer class as per IEEE/ ANSI CMPPS Combined megapulses per second...
  • Page 359 Section 10 1MRK 511 349-UEN - Glossary Data flow control Discrete Fourier transform DHCP Dynamic Host Configuration Protocol DIP-switch Small switch mounted on a printed circuit board Digital input DLLB Dead line live bus Distributed Network Protocol as per IEEE Std 1815-2012 Disturbance recorder DRAM Dynamic random access memory...
  • Page 360 Section 10 1MRK 511 349-UEN - Glossary Graphical display editor within PCM600 General interrogation command Gas-insulated switchgear GOOSE Generic object-oriented substation event Global positioning system GSAL Generic security application Generic substation event GPS time synchronization module GPS Time Module HDLC protocol High-level data link control, protocol based on the HDLC standard HFBR connector type Plastic fiber connector...
  • Page 361 Section 10 1MRK 511 349-UEN - Glossary I-GIS Intelligent gas-insulated switchgear Binary input/output module Instance When several occurrences of the same function are available in the IED, they are referred to as instances of that function. One instance of a function is identical to another of the same kind but has a different number in the IED user interfaces.
  • Page 362 Section 10 1MRK 511 349-UEN - Glossary National Control Centre Number of grid faults Numerical module OCO cycle Open-close-open cycle Overcurrent protection Optical Ethernet module OLTC On-load tap changer OTEV Disturbance data recording initiated by other event than start/pick-up Overvoltage Overreach A term used to describe how the relay behaves during a fault condition.
  • Page 363 Section 10 1MRK 511 349-UEN - Glossary Remote terminal unit Substation Automation Select-before-operate Switch or push button to close Short circuit location Station control system SCADA Supervision, control and data acquisition System configuration tool according to standard IEC 61850 Service data unit Serial communication module.
  • Page 364 Section 10 1MRK 511 349-UEN - Glossary Time delayed earth-fault protection function Transport Layer Security Transmit (disturbance data) TNC connector Threaded Neill-Concelman, a threaded constant impedance version of a BNC connector Trip (recorded fault) TPZ, TPY, TPX, TPS Current transformer class according to IEC Transformer Module.
  • Page 366 Contact us ABB AB Substation Automation Products SE-721 59 Västerås, Sweden Phone +46 (0) 21 32 50 00 +46 (0) 21 14 69 18 www.abb.com/substationautomation...

Table of Contents