Coupled Markers move on ALL traces at the same time.
How to create Uncoupled Markers
NOTE
Markers are coupled by default.
To create markers that are NOT coupled (move independently on each trace):
Press Marker
Then
Then
Marker Colors
In NA and CAT Modes, markers are the same color as the trace to which they are
assigned, as shown in the above image. In SA Mode, the marker color is NOT the
same as the trace.
Marker colors can NOT be changed.
Marker Trace
Both CAT and NA Modes can display a data trace and a memory trace. By default,
markers are assigned to the data trace. However, you can move a marker between
the data and memory trace. The marker moves to the same X-axis location on the
specified trace.
When Coupled Markers is ON, this setting applies to the active marker for ALL traces
that are coupled. Otherwise, this setting applies to the active marker on only the
active trace.
How to move a marker between data and memory traces
Create a data and memory trace that will host the marker. Learn how on page 122.
Press Marker and Enter to create a marker.
Then
Then select the marker to move using
Then toggle
Data Analysis Features
More
Coupled Markers OFF
More
Marker Trace Auto Data
Auto - Marker resides on data trace when it is visible. Marker resides on memory
o
trace when only IT is visible.
Marker
1,2,3,4,5,6.
Mem.
113