Spectrum Analyzer Retrofit Requirements; N9030A Signal Analyzer (Requires Option Exm); N9020A Signal Analyzer (Requires Option Exm) - Keysight M1970 Series User Manual

1 Overview

Spectrum Analyzer Retrofit Requirements

N9030A signal analyzer (requires Option EXM)

Instruments without Option EXM currently installed can be retrofitted to add the
hardware and licensing.
To retrofit Option EXM:
Table 1-3
– The N9030A software revision must be A.08.52 or later for use with V or W
NOTE
– The N9030A software revision must be A.11.00 or later for use with E band

N9020A signal analyzer (requires Option EXM)

Instruments without Option EXM currently installed can be retrofitted to add the
hardware and licensing.
To retrofit Option EXM:
Table 1-4
20
Option EXM retrofit for N9030A
N9030A frequency option
550, 544, or 543
503, 508, 513, or 526
band mixers.
mixers.
Option EXM retrofit for N9020A
N9020A frequency
option
No upgrade available
<MY/US/SG5138
N9030AK-EXM
N9030AK-HL6
Serial number prefix
<MY/SG/US5233
Serial number prefix
≥MY/US/SG5138
N9030AK-EXM
MY/SG/US5233 to
5327
N9020AK-EXM
Keysight M1970 Series User's Guide
≥MY/SG/US5328
N9020AK-HL6