Sa (Spectrum Analyzer) Mode - Keysight N9912A User Manual

Keysight Handheld Analyzers
N9912A User's Guide

8 SA (Spectrum Analyzer) Mode

SA Mode measures signals at the RF IN port. The RF OUT connector is NOT used.
General purpose Spectrum Analyzer measurements are available with Option
230 or 231. SA measurements require NO calibration.
For a comprehensive SA Mode tutorial, see Spectrum Analysis Basics (App Note 150)
at
Figure 8-1 SA Display with Markers
The graphic above shows an SA d isplay with markers.
Carrier with 5 kHz frequency mod ulation and deviation of 1 kHz.
In this Chapter
"Frequency Range" on page 8-4
"Radio Standard" on page 8-6
"Channel Selection" on page 8-7
"Scale and Units" on page 8-8
http://literature.cdn.keysight.com/litweb/pdf/5952-0292.pdf
8- 1