Group: Result Data - Baumer VeriSens ID Series Technical Documentation Manual

15.5.3.3 Group: Result data

This group is used to transfer the result data from job processing. The results datagram is configured during
job creation in the Application Suite in the step Configure interfaces → Output process interface.
Versions are available with payload capacities of 4/8/16/32/64/128/250 bytes. You should choose the
smallest possible version for the volume of data you expect to handle. An unnecessarily large selection
reduces overall system performance.
The data corresponds to response to the "GD" command from the classic process interface.
Data element Direction
Device
Actual length of
PLC
the result data
Device
Result data
PLC
(<n> byte)
v2.11.0-B4
Type Length
(byte)
UINT16 2
OCTET- 4/8/16/32/64/128/250
STRING
343/429
Technical Documentation
Description
Length of data actually used in
ResultData
Result data for job processing (data
length corresponds with the selected
module)
Baumer Optronic GmbH
Radeberg, Germany
®
VeriSens