Baumer VeriSens ID Series Technical Documentation Manual page 353

9. The Accessible device dialogue can now be
used to find the Vision Sensor without an IP
address.
Although it is still necessary to assign a
permanent IP address and a device name.
10. You have to open Non-grouped devices and use
the TIA project to click on the Vision Sensor and
Online & Diagnostics to assign a permanent IP
address and a device name for the Vision
Sensor.
Determine the IP address and subnet mask for
the Vision Sensor.
11. Click Assign PROFINET device name and
assign a chosen name for the Vision Sensor.
The data will be saved in the Vision Sensor's
flash memory and the Vision Sensor will
immediately be reconfigured.
v2.11.0-B4 353/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®