Baumer VeriSens ID Series Technical Documentation Manual page 103

The use of HTTPS requires installation of the SSL root certificate in each browser used. Follow the
instructions below to install the certificate for your browser.
Installation of the SSL root certificate
NOTE
HTTP must be active on the device to enable installation of the certificate.
®
Internet Explorer
1. Launch the browser on your device. (E.g. http://[IP address]
/?installCertificate)
2. Confirm that you want to install a certificate.
3. Confirm the opening of certificate RootCA.cer.
4. Click Certificate installation...  and the Certificate import wizard will be launched.
5. Click Continue.
6. Select Save all certificates in the following memory.
7. Click Search.
8. Select Trusted root certification location. Confirm with OK.
9. Click Continue.
10. Click Finish.
11. Confirm the Security warning with Yes.
12. Close and restart your browser.
Firefox
1. Launch the browser on your device. (E.g. http://[IP address]
/?installCertificate)
2. Confirm that you want to install a certificate.
3. Insert a check mark against Trust this CA to identify web pages.
4. Close and restart your browser.
v2.11.0-B4 103/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®