Vb Command - Restart Device - Baumer VeriSens ID Series Technical Documentation Manual

15.4.21 VB command – restart device
This function enables you to restart the device or put it into recovery mode. This command does not send a
response.
Example
Structure of the command PLC
Command Parameters
V B 0
Vision 4 byte ASCII hex
Sensor
ReBoot 0000 = Restart
FFFF = Recovery mode
v2.11.0-B4
device
0 0 0
335/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®