Baumer VeriSens ID Series Technical Documentation Manual page 113

NOTE
To use the FTP server successfully, the device requires read, write and delete access.
The device and the FTP server must also be located in the same subnetwork.
The FTP server must support encryption to be able to use SFTP.
Do not save the images and backup file to the same directory on the FTP server. This can
lead to long load times.
Saving images to the FTP server
Saving images: Select the images to be stored on the FTP server.
(NOK only = all images with the total result of "Fail", OK only = all images with the total result of "Pass")
Number limit: Use this function to limit the number of images stored. If the limit is reached, the older images
will be overwritten.
Image directory on the server: Select a directory on the FTP server where images are to be stored.
Name of image series: Provide a name for the image series.
You can configure the structure of the file name.
v2.11.0-B4 113/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®