Distortion Correction (Device Dependend) - Baumer VeriSens ID Series Technical Documentation Manual

10.2.12 Distortion correction (device dependend)

The recorded images can be contorted by lens distortion or inclined positioning of the Vision Sensor.
The Distortion correction function can be used to compensate for these distortions .
The location of the lens will determine the degree to which the image can be compensated for such inclined
positioning of the Vision Sensor. A value of around 30° to the ideal location (Vision Sensor is parallel to the
object surface) can be assumed as a "rule of thumb", whereby both non-achievement and exceedance of
this value is possible.
NOTE
A SmartGrid or target is required for calibration of this function.
After successful installation, the SmartGrids can be found in the directory:
<installation path>\AppSuite\calibration
on your PC.
You can also open the folder directly from the dialogue.
v2.11.0-B4 118/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®