Baumer VeriSens ID Series Technical Documentation Manual page 149

You have the option of recording the output of the process interface. Select a directory using Browse to
determine where the file will be saved.
Record results only: If you only want to save the actual result data, select this option.
Record all actual data traffic: check this option if you want to record all data traffic. Here all data that is
actually transferred is recorded and the file will remain empty if no data is transferred!
You can limit the duration of the test. Select a value and choose between seconds and images. You can also
activate or deactivate the outputs.
NOTE
If you do not limit the test sequence you may terminate the test at any time using the
Finish button.
ATTENTION!
If your Vision Sensor is already integrated in your machine, it is often advisable to
deactivate the outputs during the first tests to avoid incorrect behaviour of your machine.
The test is activated with the Start test button. In the list of features you will see the current results of the
feature checks and the statistics window will give an overview of the results.
v2.11.0-B4 149/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®