Receipt Timeout - Baumer VeriSens ID Series Technical Documentation Manual

15.3.4 Receipt timeout

Signal
Receive timeout T
1
If errors occur in the communication, receiving is terminated after a defined time. The data received to this
point is then discarded. The possible error causes may be:

The cable was unplugged or mechanically damaged during the transfer.

Transmission of the data was prematurely terminated due to a technical fault.

An error occurred in the transfer of the length information, so that the information is incorrectly
transferred. The device then presumes an incorrect overall length of the data.
v2.11.0-B4
Duration
min.
10 ms
304/429
Technical Documentation
max.
2000 ms
Baumer Optronic GmbH
Radeberg, Germany
®
VeriSens