Firmware Update - Baumer VeriSens ID Series Technical Documentation Manual

10.2.16 Firmware update

NOTE
During restoration of a backup or firmware, the operation of the device by uninvolved
programme components (web interface, Application Suite or process interface) is not
blocked. This means it is possible to interrupt these during the restoration process.
Do not undertake any other actions during the restoration process!
This dialogue provides support in the installation of new firmware.
ATTENTION!
Only use the most recently released version of the firmware for updating. You may wish to
ask the Support before updating firmware. Create a device backup of your Vision Sensors
before updating firmware!
Click on the button Browse and select the firmware file to be transferred.
(File extension *.vsf).
Click on the button Transfer to carry out the update.
v2.11.0-B4 129/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®