Ud Command - Transfer Backup Data (Only For Ethernet) - Baumer VeriSens ID Series Technical Documentation Manual

15.4.19 UD command – transfer backup data (only for Ethernet)
This function enables you to transfer backup data to the device.
NOTE
The backup functionality of the XF800 / XF900 vision sensors is only available via the
Application Suite.
NOTE
The device must be restarted following use of the UD command and successful transfer
of a backup, for example via the VB0000 command.
Example
Structure of the command PLC
Command Parameters
U D S
Update IP address
Device
S = static
D = DHCP
Parameters
2 5 5 . 2
15 characters ASCII
Subnet mask
Parameters
0 0 0 . 0
15 characters ASCII
Gateway
Parameters
1 1 V
2-Byte ASCII Hex Device name
Length of device
name
v2.11.0-B4
device
1 9 2 . 1
15 characters ASCII
IP address
5 5 . 2 5
0 0 . 0 0
S X F 2 0 0
6 8 . 0 0
5 . 0 0 0
0 . 0 0 0
M 1 0 W E
332/429
Technical Documentation
0 . 2 5 0



- T E S T

Baumer Optronic GmbH
Radeberg, Germany
®
VeriSens