Focus - Baumer VeriSens ID Series Technical Documentation Manual

9.1.4 Focus

The focus option uses a graphical display to help you focus the Vision Sensor.
Focussing the Vision Sensor
1. Point the device's field of view towards a model piece. Limit the field of view as required.
2. Now adjust the focus on the Vision Sensor. To do this, use the focus setting screw and the installed
lens.
 You will see how the focus changes. The best value may also increase.
3. Adjust the focus until you have achieved the optimum result (highest focus value).
Reset best value: Use this to reset the best value to the current focus value.
Limit field of view: Use this function to limit the field of view, otherwise the entire image area will be used to
calculate the focus.
v2.11.0-B4 59/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®