Baumer VeriSens ID Series Technical Documentation Manual page 58

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

Z correction (device dependent)

Here you have the option of adjusting the X, Y coordinates to a different height Z. This may be necessary if

the distance set during the distortion correction (SmartGrid surface to the reference plane) deviates from the

current height.

A distortion correction and Z-calibration must be performed before the Z-correction can be

1. Set the checkmark for Convert image coordinates to world coordinates

2. Set the checkmark for Apply Z Correction.

3. Enter the desired distance for Distance object to reference plane.

Technical Documentation

Baumer Optronic GmbH

Radeberg, Germany