Timing Digital I/Os - Baumer VeriSens ID Series Technical Documentation Manual

Technical Documentation
®
VeriSens

9.3.2 Timing digital I/Os

In this dialogue, you can define when the output time is reached and how long the output
is to be. The timing diagram displays the process visually and you can mouse over various positions to bring
up further details.
Following image acquisition, the Image trigger permitted signal is deactivated. The Image trigger permitted
signal is activated again at the end of image acquisition and another image acquisition operation is possible
immediately.
The Pass/Fail signal then switches at the set output time even if additional analyses have already been
performed. The Result valid signal is active during this time.
A maximum of 64 results can be temporarily saved.
v2.11.0-B4 71/429 Baumer Optronic GmbH
Radeberg, Germany