Example - Baumer VeriSens ID Series Technical Documentation Manual

15.5.4.5.5

Example

The following examples provide a depiction of the mapping of data elements in memory for two module
configurations.
Number Description
1 PLC
2 PLC programme
PLC process map
3
Example 1
Simple configuration – use of the "Control and status" and "Result data (32 bytes)" modules with
selected start address 1000 / 500 (start addresses subject to overall configuration).
Vision Sensor input data device
Control and status
Start address:
1000
Vision Sensor output data PLC
Start address:
500
Example 2
Extensive configuration – use of the "Control and status", "Result data (250 byte)", "Parameters (128
byte)" and "Trigger data (64 byte)" modules with selected start address 200 / 100 (start addresses
subject to overall configuration).
Vision Sensor input data PLC
Control and status
Start address:
200
Vision Sensor output data device
Control and status
Start address:
100
Device
4
v2.11.0-B4
PLC
Start address Start address
+ 13 + 14
device
Control and status
device
Start address Start address
+ 13 + 14
PLC
Result data
Start address
Start address
+ 5
+ 6
Result data
Result data
Start address
+ 252
Parameters
Start address Start address
+ 7
366/429
Technical Documentation
Start address
Result data
Start address Start address
+ 5 + 6
Parameters Trigger data
Start address Start address
+ 253 + 254
Trigger data
Start
address address
+ 137
+ 138
Baumer Optronic GmbH
Radeberg, Germany
®
VeriSens
+ 48
Start
+ 203