Angle - Baumer VeriSens ID Series Technical Documentation Manual

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

12.2.3 Angle

This feature check determines the angle between two edges or to a reference. The angle is compared with

the associated switching points.

This feature check supports external Teach. The switching points are adjusted as an absolute to the current

measured value.

Select the shape of the field of view. A search line and an arc (radial search for edges) can be

Adjust the field of view by holding the left mouse button depressed.

In this example, the angle between a vertical edge and a horizontal edge on a test object is determined by

one horizontal and one vertical search line. The angle between the detected edges is indicated directly in the

Technical Documentation

Baumer Optronic GmbH

Radeberg, Germany