Baumer VeriSens ID Series Technical Documentation Manual page 166

In this example, two points on a test object are detected with one search line each. The distance between
the intersections is indicated directly in the display:

The current result is displayed directly in the dialogue as the distance. The switching points
designated Min and Max are adjusted on the right hand side. A graphic display is located in the
middle, in which the positions of the switching points are displayed and where they can be changed.

The right button is used to invert the result of the feature check.
Select the computation method.

Point-to-point: Distance between two points

Rectangular distance: Right angular distance between two points

To reference: Distance to a reference edge

Edge to circle: Distance from one edge to the centre of a circle

Circle to circle: Distance between centres of two circles

Click on Teach to retrain a new reference.

Min. edge length: With short, medium or long, select the anticipated length of the sought contour to
achieve a consistent result. Using User defined, you may manually enter the length of an edge (5-
1000 pixels).

Transition: You must specify whether each edge can progress from bright to dark or from dark to
bright (device dependant).

Minimum contrast: You can specify whether you are searching for an edge with sharp or weak
contrast.
v2.11.0-B4 166/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®