Baumer VeriSens ID Series Technical Documentation Manual page 188


Tolerance: Now adjust the size of the pixel field in which a pixel-by-pixel search is conducted for
adjacent pixels. Distance specifies the detection area size in each direction up/down and right/left.

Observe edge direction: Mark this option to increase accuracy during the examination.

You can use these two buttons to enlarge or reduce the model.

You can gradually undo or redo the changes using these buttons.

With the displayed model, you can then use the mouse to delete contour points that clearly do not
belong to the reference object or to supplement missing contour areas.

The current result is displayed directly in the dialog as the Match. The switching point designated
Min is adjusted on the right hand side. A graphic display is located in the middle, in which the
positions of the switching points are displayed and where they can be changed.

The right button is used to invert the result of the feature check.
v2.11.0-B4 188/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®