12.
The Accessible devices dialogue will now show
the Vision Sensor with its new IP address and
device name.
15.5.4.3.2
Installation of the GSD file
Integrating the Vision Sensor into the PLC project requires installation of a product-specific driver (GSD file).
Data organisation in PROFINET is module-based. The product-specific driver describes which modules are
being offered.
Follow the next instructions to install the driver.
1.
Open the Siemens GSD file manager.
v2.11.0-B4
354/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®