Web Interface - Baumer VeriSens ID Series Technical Documentation Manual

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

Technical Documentation

9.3.6 Web interface

In this step, there is the option to assign functions to the upper 9 buttons of the web interface view.

You can assign configured feature checks and the Parameters for image acquisition button to the 9 buttons.

Once a button has been assigned a function, you can set which parameters for these functions can be

configured in the web interface by which user profiles.

If no user profile is used, only the "Expert" column will be used and the "Operator" column will be greyed out.

If you assign this function to a button, you can set parameters for image acquisition (exposure time,

amplification, edge sharpness, gamma correction) via the web interface.

Baumer Optronic GmbH

Radeberg, Germany