Connection To Multiple Devices - Baumer VeriSens ID Series Technical Documentation Manual

14.2.2 Connection to multiple devices

If you have multiple devices in your network, you can display several devices simultaneously in a single
browser window. By default you will see four frames with the available devices and their respective location
in English.
NOTE
Do not use https to retrieve the function. Devices that support encrypted data
transmission will switch to this mode automatically.
Launch a supported browser and enter the following into the address bar:
http://verisens.local/cockpit
http://[IP address]/cockpit
http://[device name].local/cockpit
http://[IP
address]/cockpit?/c[column]r[row]
Live=ip:[IP address1]&
c[column]r[row]=ip:[IP address2]&
c[column]r[row]=ip:[IP address3]&
c[column]r[row]=ip:[IP address4]
NOTE
Please input the following to alter the number of frames to be displayed to nine (e.g. 3
windows per column and three per row):
http://[IP address]/cockpit?view=3x3
Other arrangements are possible, with up to four windows in a row and column.
v2.11.0-B4
The device with the highest level of software will
determine the layout of the viewer.
The level of software of the accessed device will
determine the layout of the viewer.
The level of software of the accessed device will
determine the layout of the viewer and connect
directly to a live view of the device in the selected
rows and columns.
NOTE
Save the access parameters you created as a
favourite to gain faster access to your devices.
277/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®