Area Size - Baumer VeriSens ID Series Technical Documentation Manual

12.3.6 Area size

The feature check calculates the number of bright or dark pixels in a field of view and compares the result
with specified switching points.
This feature check supports external Teach. The switching points are adjusted as a percentage to the current
measured value.
Proceed as follows for configuration:

Select the shape of the field of view. A circle, a rectangle and a freely definable polygon, a circular
ring and a circular ring sector are available.

Adjust the field of view by holding the left mouse button depressed. You can rotate the rectangle by
correspondingly dragging the lever in the centre with your mouse.
v2.11.0-B4 199/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®