Device Activation - Baumer VeriSens ID Series Technical Documentation Manual

9.4 Device activation

Click on Activate device.
Confirm the question with Yes.
The device is now in Activated mode and processes the created job. The tabs Productivity / Statistics and
Alarms are displayed on the right in the configuration area.
NOTE
While the Vision Sensor is processing the job, you may continue to retrieve defect images
and to save images.
There is also the option to save the current job and all jobs to the PC via the Job menu.
Click on Switch job..., to change to
a different job stored in the Vision
Sensor.
Click on Reset statistics to reset
the statistics values (number of
parts, number OK, NOK, number
of alarms).
v2.11.0-B4
Click on Configure Device to
return to Configuration mode and
to make new settings.
85/429
Technical Documentation
Click on Delete defect images to
delete stored defect images
(button only appears when you
click on Defect images in the
display options).
Baumer Optronic GmbH
Radeberg, Germany
®
VeriSens