Output Robotics (Device Dependent) - Baumer VeriSens ID Series Technical Documentation Manual

9.3.3 Output Robotics (device dependent)

In this dialogue, you can configure the data outputs for the Robotics.
NOTE
You can configure the activation of this interface in the Device settings.
Device  Device settings  Robotics
Waypoint feature: Select the feature check for the waypoints of the robot. The first robot-compatible feature
check that has been configured is entered automatically. If no robot-compatible feature check is selected,
then no waypoint coordinates determined by the image processing can be used.
NOTE
To be able to select a feature check on Feature by Waypoint, the distortion correction and
Z calibration must be configured. Furthermore, Convert image coordinates to world
coordinates must be activated.
–
+
With the and buttons, you may add a new line or erase the currently selected line, respectively. Each
line contains one feature to be transferred.
v2.11.0-B4 74/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®