Baumer VeriSens ID Series Technical Documentation Manual page 280

Icon Content
In this menu, you can change the active job. You can select any job on the
device.
The chosen job will activate immediately once selected.
In this dialogue, you will see the currently saved defect images. You can
save defect images in full resolution using your browser's context menu.
Under job management you have the following options:
v2.11.0-B4

Device name

Device state

Device type

Firmware version

Serial number of the device

Name of job currently processing

Total number of checked parts

Number of parts marked good (OK)

Number of parts marked bad (NOK)

Number of alarms

All feature checks for the job with results (Number of OK/NOK)

Device processing time in ms (Parts/s)

Processing time and results for current feature check

Copy job (Copy the job from one save location on the device to
another)

Delete job (Delete job from the device)

Access job (Download a job from the device to your computer)

Transfer job (Transfer a job from your computer to the device)

Job on Power on (Set which job should be active when the device
is switched on)

Change job name (Change the name of a job on the device)

Change job location (Save the job to a different location)
NOTE
The backup functionality of the XF800 / XF900
vision sensors is only available via the
Application Suite.

Create backup on the PC

Restore from the PC

Create on the FTP server

Restore from the FTP server
280/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®