Additional Data Elements - Baumer VeriSens ID Series Technical Documentation Manual

15.5.5.5 Additional data elements

TM
Since Ethernet/IP does not provide a mechanism for spontaneous transmission of asynchronous results
from the device to the PLC, similar to the alarm mechanism in PROFINET, such events are made available in
an additional data element:
Data element Direction
Device
Alarms
v2.11.0-B4
Type Length
(byte)
PLC
UINT32 4
377/429
Technical Documentation
Description
Process alarms in terms of device functionality
Bit 0 1 in the event of data buffer overflow:
The amount of data produced by the
Vision Sensor (e.g. result data) is
larger than can be received by the
module intended., otherwise 0
Bit 1 1 in the event of pipeline overflow:
The internal buffer for data output is
full, the data was sent too slowly via
PROFINET (or not at all), otherwise 0
Bit 2
1 in the event of handshake error:
The handshake mechanism was not
used correctly, e.g. acknowledgement
without a corresponding request
being sent, otherwise 0
Bit 3
0 no thermal warning
1 thermal warning
Bit 4
0 no thermal warning
1 thermal shutdown
Shutdown of the device has occurred.
Bits 5..31 Reserved (always 0)
®
VeriSens
Baumer Optronic GmbH
Radeberg, Germany