Baumer VeriSens ID Series Technical Documentation Manual page 121

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

Importing and exporting only work with coordinates learned by SmartGrid.

Reference level Z (optional, device-dependent)

Here, you can enter the distance between the surface of the SmartGrid and the reference level (contact

surface) during calibration of the distortion correction.

The setting is required if Z calibration is to be used with coordinates at different heights or planes (Z) in the

depth of field. A reference plane may be, for example, the machine table and facilitates the handling of the

various Z-levels. If the SmartGrid is on the machine table, then the value corresponds to the thickness of the

SmartGrid (e.g. 3 mm for a finished SmartGrid).

Technical Documentation

Baumer Optronic GmbH

Radeberg, Germany