Baumer VeriSens ID Series Technical Documentation Manual page 157


If the feature check is to be corrected by the result of the part location, you can choose this option
here. The location of the detection area will be refreshed when this is activated. External teach also
makes it possible to retrain the feature check. Select the appropriate option for this purpose.

Confirm your settings and return to the feature list with OK. Return to the feature list without making
any changes with Cancel.
This feature check has the following output values for the datagram at the process interface:
Output value Data type
Result
Conformity Integer
Centre of object Float point
Angle of object's
Float
rotation
v2.11.0-B4
Description
Result of the feature check: "P" (Pass); "F" (Fail)
Match of the model (%)
Position of the object in the image (px)
Angle of the object (degrees)
157/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®