Baumer VeriSens ID Series Technical Documentation Manual page 217


Areas filter: Set the minimum and maximum size of the areas that are to be counted. These settings
refer to all areas and not to an individual colour. If you hover the cursor over this area, you will see
the size of the detected area in the detection area in the image.

Exclude cropped areas: Areas which touch the edge of the field of view are excluded from the
analysis.
Automatic brightness correction
In order to be independent of fluctuations in the ambient light, the device offers a means of automatically
correcting the brightness.

Use, do not carry reference area: Here, a field of view is defined as a reference area, for example
by attaching a white label to the edge of the conveyor belt (static). The brightness correction is now
guided by the brightness of this area.

Use, carry reference area: This function is only available in connection with part location. A field of
view is still used as the reference area. However, this is carried with the position correction. The
brightness correction is now guided by the brightness of this carried area.
v2.11.0-B4 217/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®