Setting The Display Screen - Baumer VeriSens ID Series Technical Documentation Manual

14.5.6 Setting the display screen

By default, the current image is refreshed as quickly as possible. If you want a constant image refresh rate,
say to reduce network traffic, you can change this rate using a parameter on opening the web interface:
http://[IP address]/?refreshTime=t
The cycle time t is specified in milliseconds. A value of 0 means that the images are to be transferred as
quickly as possible.
If display errors result when using a fixed image refresh rate, please increase the cycle time value.
NOTE
It is possible that the device is transferring image data via the web interface while
simultaneously being linked to an Application Suite. In this case, the image data are
preferably transferred to the Application Suite with the image frequency on the web
interface being correspondingly reduced.
You can check in the Status area whether the device is linked to an Application Suite.
v2.11.0-B4 294/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®