Profinet; Leds On The Vision Sensor; Cabling - Baumer VeriSens ID Series Technical Documentation Manual

15.5.4 PROFINET

15.5.4.1 LEDs on the Vision Sensor

LED Meaning
Indicates that the Vision Sensor is connected to a network.
LINK / ACT
Indicates that data is being transferred via Profinet.
NET RUN

15.5.4.2 Cabling

Follow the general rules for cabling Industrial Ethernet.
Use a shielded cable for data transfer. The maximum cable length is 100m. Make sure during cable
assembly that the cable shield is properly connected with the connector housing.
v2.11.0-B4

On: Network connection established

Blinking: Data traffic active

Off: Profinet will not be used

Long blinking: Waiting for first cyclical connection

On: Cyclical connection active

Short blinking: Cyclical connection ended (waiting for next connection)

3 seconds of regular blinking: Device identification in the system
350/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®