Integration Of The Vision Sensor Into The Plc Project - Baumer VeriSens ID Series Technical Documentation Manual

15.5.5.4.3

Integration of the Vision Sensor into the PLC project

Follow the next instructions to integrate the Vision Sensor into the PLC project.
1. Open the project in Rockwell Studio 5000 Logix
Designer.
Right click on Ethernet and select New module
to create a new module for the I/O
configuration.
2. Search and create the corresponding module in
the catalogue.
3.
Enter a name for the Vision Sensor.
Enter the determined IP address for the Vision
Sensor.
 The Vision Sensor has now been installed.
v2.11.0-B4 374/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®