Baumer VeriSens ID Series Technical Documentation Manual page 231

The Additional tests tab can be used to determine the criteria for subsequent testing of each located object.
This enables detection of overlapping objects, for example, by stipulating criteria in their vicinity or on the
surface of the object.
These additional tests can be used to discard initially located objects.

Select Add and then select a feature.

Now a shape (rectangle, circle) can be selected for the area to be marked.

The next step is to mark the test area within the image.

Criteria for this feature check can now be configured in the area on the right.
v2.11.0-B4 231/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®