Baumer VeriSens ID Series Technical Documentation Manual page 125

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

Technical Documentation

It may not be possible to fully offset all differences in brightness if the maximum gain

factor (3.0) is reached in many areas of the image.

Please check the lighting situation and the homogeneity of the template and perform

shading correction again.

5. Press OK. The programmed shading correction is saved on the Vision Sensor.

This function can increase the Vision Sensor's start-up time. You can reduce the start-up

time by pressing Delete if this function is not required.

Disabling the function within image settings is not sufficient for this!

Baumer Optronic GmbH

Radeberg, Germany