Command Gf - Retrieve Individual Files From The Device - Baumer VeriSens ID Series Technical Documentation Manual

15.4.6 Command GF – retrieve individual files from the device
This function enables you to access individual data on the device.
Example
Structure of the command PLC
Command Parameters
G F 0
Get File
0000 = List of all jobs
01nn = Retrieve job
02nn = Call a job using the job name
0300 = Access Logging
Structure of the Response PLC
Response
R F 0 0 0 0
Response
4 bytes
File
ASCII-hex,
mirrored
parameters
of the GF
request
v2.11.0-B4
device
0 0 0
(nn 2 byte ASCII-Hex Job number)
(nn:2-byte ASCII hex length of the file name + file name)
device
0 0
2 bytes ASCII hex: Error
code
00 = no error
occurred
01 = is not in
Configuration- or
IDLE- mode
02 = File not found
04 = last file still
being retrieved
FF = internal error
0 0 0 0 0 0 F 1 2 3 ...
2 bytes 8 bytes ASCII hex
ASCII hex Length of the following
Reserved data
313/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®