Baumer VeriSens ID Series Technical Documentation Manual page 240

NOTE
In order to be able to make the settings "Appearance" and "Code parameters" on the
tabs, you must set the Parameters on the "Common" tab to User defined.

Colour conversion: Enter the method you wish to use to convert the field of view into a black and
white image here. Select Gray value, if the black and white version of the field of view contrasts well.
Select Two colour optimization if the barcode and background appear in similarly light colours.

Polarity: Specify whether the code is brighter or darker than the background. The Arbitrary option
doubles the processing time.

Minimum contrast: Specify the minimum contrast of the barcode.

Noise suppression: Activate this function if you want to minimize noise.

Bar width (pixel): Specify the minimum width of one bar of the barcode.

Bar height (pixel): Specify the height of one bar of the barcode.

Orientation (Degree): To reduce processing time, you may restrict the barcode orientation. To do
this, specify the maximum deviation with respect to the position of the field of view.

Check character: Specify whether you want to use a check digit.
v2.11.0-B4 240/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®