The file name configuration gives you the option to freely arrange up to seven entries. You can also define
separation markers.
The entry options for the device are:
The chosen name of the image series
Sequential numbers generated by the system (00000001 – 99999999)
The result of the analysis
The additional data applied to the image using the TD command
The job name
The job number
A time stamp (local): FTP server time similar to Time stamp (UTC), although here a local offset can
additionally be configured under Time zone (local). This value consists of the chosen time zone and
– if selected – the consideration of summer time. Switching between summer time and winter time
then occurs automatically within the device and matches the chosen time zone.
A time stamp (UTC): Time from the FTP server (the Vision Sensor time is synchronised with the FTP
server every time it is restarted).
Backup via FTP
Directory for backup: Select a directory on the FTP server where the backups are to be stored.
v2.11.0-B4
114/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®