Led Panel (Devices With Integrated Industrial Ethernet) - Baumer VeriSens ID Series Technical Documentation Manual

6.11 LED panel (devices with integrated Industrial Ethernet)

A screw and 5 LEDs are located on the Vision Sensor for displaying the various states.
Image focus setting screw: Used to set the image focus.
NOTE
For devices with interchangeable lenses, the image focus is set on the installed lens.
LED Meaning
POWER Indicates that the Vision Sensor is being supplied with electricity.
Indicates that the Vision Sensor is connected to a network.
LINK / ACT
Indicates that data is being transferred via Industrial Ethernet.
NET RUN
FAIL Lights up when a feature check has been failed.
Lights up when a feature check has been passed.
PASS
NOTE
POWER blinking: Vision Sensor starts
Pass/Fail flash simultaneously: Vision Sensor is in Recovery mode
v2.11.0-B4

On: Network connection established

Blinking: Data traffic active

Off: Industrial Ethernet will not be used

Long blinking: Waiting for the first cyclical connection

On: Cyclical connection active

Short blinking: Cyclical connection ended (waiting for next connection)

3 seconds of regular blinking: Device identification in the system
33/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®