Digital Interfaces; Explanation Of Terms From The Timing Diagram - Baumer VeriSens ID Series Technical Documentation Manual

13 Digital interfaces

13.1 Explanation of terms from the timing diagram

Alarm
Trigger
Flash Sync exposure time
Camera ready
Result invalid
Pass
Fail
T
Device activated
v2.11.0-B4
Indicates that an irregularity has occurred that should be investigated
more closely by an expert.
Input signal that triggers image acquisition
Output signal for triggering external illumination
Shows that the result is at one of the outputs (pass/fail) and can, for
example, be read by an PLC (not for varied output times).
With the device, a new image can be recorded before the current analysis
is completed. There is internal storage for two images for this reason.
Indicates that the result can be read at the outputs (pass/fail).
Feature check passed
Feature check failed
Time
Shows that the device is activated and ready to run inspection task ("Run
Mode").
263/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®